Alternative?
Gary Smyth
>This answer may not fit your bill, but at a house sale I bought a 4 x 36�/ 6� belt /disc, and a 1 x 42�/ 6� belt /disc motorized sanders. One is a Craftsman (holdon now) and the other is a RTC (whatever that is). I paid $10 each for them. That was three years ago and I figured that if they ran I couldn�t afford not to buy them at that price if just for the motors. I�m here to tell you I thought that they would run rough and die on me within six months. They didn�t. I use them practically every day. They have turned out to be goto machines. With rapid belt changes and stick on discs conversions from one grit to another takes, what, 10 seconds. I put the finest grit on the 4 x 36 (600) and 220 grit on the 1�, the discs have 120 and 220. I use them for flattening scrapers, the 1� is ideal for touching up turning tools, the 4� for flattening the backs of hand chisels, and lots of other stuff-- including wood. A used 600 grit belt can flatten the back of a hand chisel to mirror polish in three second spurts. You have to be careful and ease it onto the belts supporting flat back to front, but it works. I need to install a speed rheostat someday, but for three years it�s been fine. In my case, a huge 12� disc and 6� belt would be a nice thing but these little �fluff� machines have worked far better than I ever expected. The point is don�t dismiss off name/non name/bad reputation brands if what you want is �what the machine does� not the name on it. I wouldn�t trade these machines. They are convenient, don�t eat up much space, I can hand carry them. Think about what you want to do. If a small machie will do the job, don�t dismiss them.