Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Tool question , ball peen hammer

Posts

Tool question , ball peen hammer

#1

Tool question , ball peen hammer

Gary Smyth

>I�m curious. A week or so ago I went to one of the big box stores looking for a ball peen hammer. On every one of the hammers on the ball section it was not a pure semicircle round top but mostly round but with a slight pointy portion at the center. The point is slight and more like a raised section but clearly not round. So during that weekend I went to some estate sales/flea market and without batting an eye there were ball peen hammers all over the place. I bought three different sizes for about a buck apiece. No one there seemed to want them and one seller asked what they were used for. The ones I bought are old and have seen use but perfectly acceptable. Each of the old hammers has a ball portion that is dead on round�no hint of a slight raised pimple at the front. So my question is this. Is the �pimple� a manufacturing thing for modern hammers or is it something that with use gets �pounded� down forming the semicircle? Are the modern hammers used for different tasks and therefore shaped differently? I cannot believe that a modern tool maker couldn�t make a perfect semicircle if they wanted to. Anyone have any ideas why the old hammers are shaped round and the modern ones are slightly less �perfect� semicircles?

Re: Tool question , ball peen hammer

#2

Re: Tool question , ball peen hammer

Bill Houghton, Sebastopol, CA

>No idea for sure, but there are LOTS of things that aren't done as they used to was.

My 1973 Craftsman ball peen is a half-dome, as is an unknown-age hammer I got somewhere; on the other hand, the heavier unknown-age hammer I picked up used in 1968 or so actually has a flat spot and facets instead of a proper half-dome.

Buy the old stuff. Quality is likely to be higher, and the price is sweeter.

Re: Tool question , ball peen hammer

#3

Jesper, Denmark

Re: Tool question , ball peen hammer

Jesper, Denmark

>My ball peen hammers do not have a semicircular peen, but a slight oval shape, a little more pointy than a semicuircle would be.

I am sure this is design, not wear.

Re: Tool question , ball peen hammer

#4

Re: Tool question , ball peen hammer

john lucas

>You've got me wondering and I'll have to go look at mine. I have an old one that I've had for 30 or more years and I picked up 3 different sizes of the cheap ones simply because they came in a pack and I needed a smaller one. The price of all 3 together were cheaper than one good quality one.

I would suppose it's who designs it that decides what shape (duh stupid answer). Originally they were for peening over rivets I think and as such might come in several shapes depending on what you were actually hitting and the shape of the final rivet head.

The kind used for shaping bowls and metal are more rounded and polished and considerably more expensive. I'm guessing the ball peen hammer was a sort of multipurpose tool and as such has been bastardized over the years and probably only closely resembles the one originally designed for a specific purpose.

Re: Tool question , ball peen hammer

#5

More than I ever thought..... *LINK*

Mark Goodall - ATL - tooljunkie

>There's more to a ball-peen hammer than I ever thought....

Happy Woodworking!


http://en.wikipedia.org/wiki/Ball-peen_hammer

Re: Tool question , ball peen hammer

#6

Re: Tool question , ball peen hammer

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>I was wondering if maybe the ones you saw in the store may have missed the final finishing step, leaving a little tip, or maybe it was made for a special function.

I found one laying in the street about a year ago, covered with grease. It was inscribed Sue z Q. I don't know if that was the owner, or maybe someone names each tool.

My grandfather was a blacksmith, so my dad helped him in the shop when he was growing up. When I was a kid, Dad had a hardware store. The local blacksmith shop was about a block down from our backdoor. We could hear the ring of the hammer on steel from anywhere in our small town. Dad could tell me what chore Mr. Moore was doing by the pitch and rhythm ringing out from his anvil.