Woodslicer Resaw Blade
George@Colonel's Workshop-Havertown PA
>Good Morning Friends,
On a whim, I ordered a Woodslicer 1/2" resaw blade for my 14" Jet Band Saw w/riser block. Heretofore, I've used and been very satisfied with the Suffolk Machinery "Timberwolf" offerings. I had to resaw some 6"poplar boards last night, as well as 8 inch wide QS Sycamore.
I knew the poplar wouldn't present any problem. The sycamore is a bit more dense, and was two inches wider. The Woodslicer went through it effortlessly. There was a little more "drift" to compensate for, but it was well within the capabilities of my resaw fence set-up. Further, the fresh sawn interior surfaces were very smooth. I never considered resaw work as "fun". What I need now is for somebody to send me a free shipment of QS Sycamore so I can have more fun. About 100 bf would do just fine for starters. Thanks in advance. :<)
George



