We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
A question - cyclone separator lids that fit onto a 30 gallon metal trash can. I've looked through the archives here and found varying comments about these. I see at least 3 types offered for sale, the Veritas, one with sloped inlets and outlets, and one with a 90 degree fitting on the bottom with an integral handle. All are made of plastic. Are they any good,and if so, which ones? I would like to use 4" hoses in and out with a Jet 2 HP vac system.
TIA,
John
PS - I read the comments about the Veritas top in the archives - so I guess I'm primarily asking about how the other two units compare...
>Well I have the one with the 90 degree elbow on the inside. Got for $20 or so on sale at Woodcraft. It works very well. Hardly any chips in the collector bag and only a little light dust. The fittings on the top are tapered and make for easy and tight fits.
I can't comment on how it effects airflow, suction, static pressure, etc. as I'm not that technical. I do know that a friend got one of the kind without the elbow and was not so complementary. A lot of chips went straight into the collector.
>I can only speak for the Lee Valley lid; it works perfectly on a 30-gallon can. I do need to empty the can before it reaches 2/3 full or it'll send chips to the collector.
>I have one that I picked up from peachtree at a ww show price of about 20 bucks. Add a 30 gal metal can and it catches almost everything and keeps the bag emptying chore to a minumum. I'm very pleased with it.