Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

1947 Dunlap 42" lathe

Posts

1947 Dunlap 42" lathe

#1

1947 Dunlap 42" lathe

mark stone

>Hi all,

A friend of mine picked up a 1947 42" Dunlap Lathe. This looks to be in original condition. The bed is real smooth and flat. It has a 3 horse power motor that looks to have been replaced at one time or another. It weighs about 75-100 lbs.

He paid 30.00 for it at a garage sale. The the tail end slid perfectly into the center of the motor side shaft. Looks to have been really taken care of. No other information. Anybody know anything about these Dunlaps?

Thanks,

Mark Stone

Re: 1947 Dunlap 42" lathe

#2

Re: 1947 Dunlap 42" lathe *LINK*

wilbur

>Dunlap made Craftsman lathes for Sears at one point. These lathes were designed for spindle turning, as their swing was usually less than 10", and back in the day bowl turning wasn't as popular as it is now. It should be a nice lathe, assuming that the bearings are in good shape.

Is there really a 3HP motor on it? That would be way overkill for this type of lathe. Usually they would be powered by a 1/4-1/3 HP motor.

Here's a link to the Old Woodworking Machines website where you can see pictures of Dunlap lathes.


Dunlap lathe pictures

Re: 1947 Dunlap 42" lathe

#3

Re: 1947 Dunlap 42" lathe

mark stone

>Thank you Wilbur!