Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

>19 Oct 2009

Good Morning,

Well, the rain finally left, the clouds finally left, and we now see beautiful bright sunshine here in The Natural State!! I love it when the nice weather breaks out and the temps are just great. 40's at night and 60's during the day. Enough on how nice it is to have nice weather. :-)

I took some much needed time off of work last week and spent that time doing stuff around the house and shop that I hadn't done in almost a year.

We split and stacked 2 chords or firewood and we still have about a face chord left laying on the ground that still needs to be staked, but I'll have to make a place for it. Some of the wood was hand split by splitting maul but the majority of it was split with a hydraulic splitter that I borrowed from a guy at work.

The LOML and I spent 2 days working in my shop getting it cleaned up, organized, and put up stuff that I was just too busy to find the time to put it all back up. It was really nice to get out in the shop again and I also spent some of that time last week to make 3 shadow boxes. I made 2 but the later warped, found some better wood and made another shadow box and so far, it is nice, straight, and clean. I'll get it finished and delivered today I hope. The other two, I'll simply rework them to some degree and give them away.

Maybe....just maybe I'll have time to take a casual ride on my motorcycle before I have to go back to work. BTW, I'm still riding my motorcycle as my daily commuter type transportation to/from work. I even ride during the winter when the weather conditions permit. I really, really enjoy motorcycling.

The only other thing (besides the day job) is I'm playing bass guitar at church most every week now and doing some "session" playing for a few local folks that are recording their own stuff and need a bass player for their songs. I am truly thankful for the talent I have been given.

Well, that's it for me....so what did YOU do this past weekend?

Best of weeks to you all!

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Alan Young

Re: WC Weekend Accomplishments....

Alan Young

>Hi Dennis,

I normally love this time of year with the fall coolness and colors-but our furnace died a week ago and the new one won't be operational for at least another week. It makes our 1895 House in October feel like Decemburrrr..


My shop in the basement is actually the warmest place in the house due to the geothermal effect. Barely warm enough for glue and finishes to work. I have two music cabinets to finish in the next week.


Inlayed panels for the doors and hardware were the tasks this past week.


Alan

Re: WC Weekend Accomplishments....

#3

First day of the rest of my life *LINK*

Mark Nowicki

>No woodworking, just dry walling, taping and plastering.

This weekend would have been my father's 78-th birthday. It is hard to believe that he passed away 14 years ago.

Found out that my neighbour, who is younger than me, has four children just as we do. is in a fight of life with cancer. Tubes in his body, chemo and radiation at the same time.

Told the General Contractor for whom I subcontract, that I will not accept any more work this season. Last season the promised work did not materialize because the other crew was "keeping up". This year half the other crew retired, leaving him with a warehouse full of windows and doors to install, and no one to install them. Oh well.

Bought new skis , jacket , and joined a ski school (Rod Roy). I plan on becoming an expert skier this season. My children are welcome to tag along, if they can keep up, on my terms and my schedule.

I have decided to spend All Saints Day in a traditional way. Leaving for Poland next week. I will be visiting dead relatives whose funerals I was unable to attend due to a little economic/political experiment invented in England and first implemented in Eastern Europe.

Mark


All Saint Day

Re: WC Weekend Accomplishments....

#4

Alan Young

"Sine Nomine"

Alan Young

>

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

Dan Donaldson

>What kind of bike do you have? I have put almost 7000 miles on mine so far this year. Would have been more, but I was gone most of July so didn't ride much that month. There are three things that I like to do: Woodworking, motorcycle riding and messing with the computer. Which order depends on the time of year and what kind of a mood I am in at the time. ;-)

Re: WC Weekend Accomplishments....

#6

More Work On The Shaker Six Drawer Chest.

George@Colonel's Workshop-Havertown PA

>Hello Dennis,

Busy had been the word. Saturday and Sunday was spent in final fitting drawers in the chest, and fabricating the two drawer vallet which goes on top. After a lot of fussing with pocket screws and cross grain alignment I got it together,m only to discover the bottom was warped to more of an extent than I want. So, it'll have to be replaced. Bummer, there. I also ripped and cross cut the QS Sycamore drawer front lumber for re-sawing tomorrow. Lots of dust. Had my 1 1/2 week old grand daughter Maggie, visit us for the first time last night. What thrill I felt holding her! Ten of us were at the family dinner party last night, and had a marvelous time. Today I bought a new Mustang--just to start the week properly.

George

Re: WC Weekend Accomplishments....

#7

Ellis Walentine

Progress

Ellis Walentine

>Hello Dennis,

I have so many things going on that progress on any one of them is somewhat glacial. I'm about to glue up four cabinet doors for the big ol' freestanding closet I'm building. I decided to use a technique I used to like in the old days -- essentially connecting the panel to the frame by means of independent splines. It's a neat effect IMO -- a little fussy maybe, but worth it. Here's a shot of the basic components unassembled. The woods are walnut, wormy chestnut and East Indian rosewood.


Other than that, our oldest daughter was in town from NC to celebrate our youngest daughter's 30th birthday. What a fun surprise!

Cheers,

Ellis

Re: WC Weekend Accomplishments....

#8

Re: First day of the rest of my life

Lewis Dodd

>I can definitely relate. I have really scaled back after fighting cancer on two different occasions, prostrate and melanoma. I highly and I mean highly recommend Lance Armstrong's book "It's not about the Bike". It helped me a lot.

Wish your neighbor the best.

Lewis Dodd

Re: WC Weekend Accomplishments....

#9

Ellis - can you elaboate on that technique

Howard In Toronto

>The panel and spline things sounds intriguing.

Any details you can share?

Thanks.

Howard

Re: WC Weekend Accomplishments....

#10

Ellis Walentine

Sure, Howard

Ellis Walentine

>


Hi Howard,

It amounts to a panel within a frame within a frame, if you want to think of it that way. In this case, the immediate frame around the center panel is four pieces of loose rosewood spline, which in turn floats in the outer walnut frame. I have used variations on this technique many times over the years on all kinds of things, like this front door. In this case, instead of a spline, there is actually a separate frame that is flush with the outer frame.



I used the spline treatment on this wall cabinet. The tricky part here was cutting the curved splines for the top and bottom of the panel.

I like the opportunity to introduce a transitional element between two dissimilar woods. I sketched a little cross-section below. Naturally, you need to provide the same room for expansion of the panel as you would if the panel had integral tongues instead of splines.

Ellis




img

Re: WC Weekend Accomplishments....

#11

Re: Sure, Howard

Fred Davis

>Considering that it is your front door Ellis , do you think the Spline connection for the panels is as strong as a integral convential raised panel connection?

FredD

Re: WC Weekend Accomplishments....

#12

Ellis - that's a GREAT idea

Howard In Toronto

>I especially like the reveal the spline creates in the drawing you attached.

Thank you for that.

Also, are any of the panels glued to spline or does the whole assembly float?

Thanks Ellis.

Howard

Re: WC Weekend Accomplishments....

#13

Ellis Walentine

Plenty strong

Ellis Walentine

>Actually, I wish it were my door, but it's one I made for a client years ago. The entire door is 1 3/4" thick, with 1/2" tongues around the outsides of the panel and the middle frame -- no splines. In other words, the middle frame takes the place of the spline in my cabinet door design.

Once it is assembled, it is plenty strong, although on a thin panel, a good kick could probably do more damage than on a panel with an integral tongue. That's a legitimate design concern that varies with the situation. I'm not worried about it in any of the applications where I've used it.

In answer to Howard's follow-up question, you can glue a frame (or spline) to the surrounding frame, but not to a solid wood panel. That also adds a bit of rigidity to the system.

Ellis