Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Contractor motor cover?

Posts

Contractor motor cover?

#1

Contractor motor cover?

Doug Ridley

>If I fabricate a cover for my Delta contractor saw large enough to allow it to tilt will it cause any problems?Overheating for instance. I can't see any problems and I would like to improve my dust collection. Also can anyone steer me to a site where this has been done?

Re: Contractor motor cover?

#2

Re: Contractor motor cover?

Dave's Not Here

>Why do you want to enclose the motor? Wouldn't it be much easier to just close up the back of the saw? That's what I did with my contractor saw, along with closing up the bottom and it works very well. For the bottom I just mounted a toilet flange to a piece of ply and hook my DC up to that. For the back, I actually used two pieces of ply and just did cut-outs for the motor mount hardware and the belt.

Re: Contractor motor cover?

#3

Re: Contractor motor cover?

Doug Ridley

>Sounds pretty good. I don't reckon the small openings would cause any significant loss of suction. I'll take a look at that. Thanks.

Re: Contractor motor cover?

#4

Re: Contractor motor cover?

Dave Bair, Eaton Rapids, MI

>Check out the June FWW (Issue 205) for an excellent saw-dust-proofing article that includes a motor box for a contractor's saw.

Re: Contractor motor cover?

#5

JL

Re: Contractor motor cover?

JL

>Check out Chuck in ND's posting on his contractor saw and other modifications about dust collecting. The saw stuff might be in the archive.

Re: Contractor motor cover?

#6

Re: Contractor motor cover? *LINK*

Chuck in ND

>Click on the link to learn more.


A better solution

Re: Contractor motor cover?

#7

HVAC vent blocks

Mark Goodall - ATL - tooljunkie

>HomeDepot/Lowes sell these plastic magent things that are used to cover up HVAC vents in your house. They look like those plastic magnet business cards that real-estate agents give you to put on your fridge, but they're much bigger. Package of 3 for udner $10 and they're really handy for this.

Happy Woodworking!