Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

A fortuitous turn of events

Posts

A fortuitous turn of events

#1

A fortuitous turn of events

Nathan

>Hello to all. After years of trying to learn woodworking and set up a shop on my own in a foreign (to me) country (the Czech Republic), I finally took the plunge and, at 40 years of age, am now officially a part-time apprentice in an architectural woodworking shop.

While they've got a full complement of machinery (including the Altendorf F45 - a beautiful saw) which they obviously make full use of, the owner has me mostly at the bench, either detail sanding prior to glue-up or practicing with hand tools. Yesterday he showed me how to sharpen chisels and plane irons.

It's like I died and went to heaven!

Re: A fortuitous turn of events

#2

Re: Living the dream

Joel M Kramer

>Keep at it, it only gets better as you learn more. From some not too far away.

Re: A fortuitous turn of events

#3

Re: A fortuitous turn of events

Tony - Memphis

>Congratulations! How about some pictures of the shop and what sort of things you build there?

Tony (who wishes he was making sawdust right now!)

Re: A fortuitous turn of events

#4

Congratulations!

Stephen Kirk in Quakertown PA

>That is great news. Very heartening to hear as well. I'm coming up on the 40 mark and am contemplating a change in professions.

Please, tell us more as time goes by. I'm sure you will learn some amazing things.

Re: A fortuitous turn of events

#5

Re: A fortuitous turn of events

Thomas Skaggs, Foothills of Mount Level

>Good deal! Any time you can work at something you love is a good thing. Best of all, you will learn a lot! Good luck.

Tom

Re: A fortuitous turn of events

#6

Nathan, You Are One Lucky guy!

George@Colonel's Workshop-Havertown PA

>Good Morning Nathan,

The time and place of my education, as well as family expectations, steered me away from manual trades as a livelihood. It wasn't until my #3 son got a scholarship to Williamson Free School of Mechanical Trades, and we took a campus tour, that I realized how wonderful it would have been to have my own machine shop. I was heavily into woodworking as a third job, but I experienced a genuine thrill being around metal working machines for the first time. That revelation came too late in my careers to matter. Certainly not too late for you, and I'm a bit jealous. Congratulations.

George

Re: A fortuitous turn of events

#7

keep us posted on what useful techniques you learn

Bill Tindall, E.TN

>

Re: A fortuitous turn of events

#8

Re: Nathan, You Are One Lucky guy!

Nathan

>I enjoy metalworking machines too - I often think up excuses to go down to the local machine shop and have spent real money having the machinist make things for my shop which later turned out to be, well, practically useless. But now I count the machinist as a good acquaintance and he's always willing to help with advice and do whatever machining I happen to need or just fancy.

Metalworking has the advantage of not producing dust, but the disadvantage of being much, much dirtier than woodworking. Hm, just stating the obvious.

Re: A fortuitous turn of events

#9

What I learned first day on the job *LINK*

Nathan

>On my first day, I learned:

(1) A real workbench, with a front and shoulder vice, is essential. I had been fantasizing about eventually building my own uber-bench and getting by with a jury-rigged thingy until then, but now I know I have to be realistic and just buy one. Below I'm including a link to the one I'm looking at - it's the same model as we use in the shop. The top is 2" thick (50mm) and is made of European Beech. At first I thought this kind of bench wouldn't be hefty or stable enough, but the benches at the shop seem to have held up very well under reasonably use, and they are a joy to work at.

(2) Cast-iron planes are not necessary - they are rare, here and can be purchased for a fraction of the cost. The pros at the shop use wood planes only - I saw one of the guys use one to clean up the joints on a window frame.

(3) At the pro shop, time is of the essence. You're not going to see them choose a time-intensive method when a more efficient method is available. On the other hand, there's no sense of hurry in the shop at all. The guys concentrate on the work at hand and are careful at all times. I realized I've got a lot to learn in this department.


Bench I'm looking at

Re: A fortuitous turn of events

#10

Hope pix will come in future

Nathan

>Hopefully I'll be able to take pictures at some time in the future but I don't see an opportunity for that now - for one, I'm the new guy on the block and, two, the atmosphere at the shop is pretty intense - I was told work starts at 7:00 and I arrived at 7:00 sharp, only to find all four employees and the owner were already there, machines running and work in full swing. All day, except for two half-hour breaks, it was constant work, with multiple projects moving through various stages of completion, plus customers coming and going.

There are three main work areas - a machine room, a hand-tool and assembly room (plus the edgebander, the boring machine, and the veneer press), and upstairs is the finishing room, a corner of which is dedicated to basic metalworking with a bandsaw, a milling machine, and a drill press. Outside there are big piles of lumber in stick and a shed full of more wood.

As for the work they do - mainly interiors, using both solid wood and sheet goods. I saw windows, doors, railings, a fireplace mantel, and shelves as well as parts for other projects which I didn't immediately recognize.

Re: A fortuitous turn of events

#11

Re: What I learned first day on the job

Kneale Brownson..Packing for return to CO snows

>Among traditional apprenticeship tasks would be producing your own bench and a chest for your supply of tools.

Unless you're in a particular hurry, those might be beneficial learning practices even today. And probably a lot cheaper!