Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Unisaw

Posts

Unisaw

#1

Unisaw

Lester Gillett

>I just purchast a 1970 unisaw in good shape. I will need to change the

motor out as the one on it is 3ph. What i need is the motor cover. I

whent to the delta repair center here in town but all they had was the

black platic one thats to big. The unisaw is a 34-450 modal, any ideas

as to where to buy one that came on it or would it be batter to make

one. Would like to keep it looking like it was new.

Lester

Re: Unisaw

#2

Re: Unisaw

Bill Houghton, Sebastopol, CA

>Register at Old Woodworking Machines, and go to the "Bring Out Your Dead" message board (look for the "BOYD" link at top right of the screen) to post a "Want to Buy." Include model and serial number.

Those plastic coffins they use to cover the motor now are ugly things, aren't they?

Re: Unisaw

#3

Re: Unisaw

Mark Goodall - ATL- tooljunkie

>Have you tried eBay? Or try calling Redmond-Machinery in Atlanta, they have alot of old parts.

The new black plastic ones look strange. I think I prefer the metal ones. Does the 1970's Unisaw have the rounded or squared cover? If it's the square edged one, it wouldn't be hard to make one yourselve out of the appropriate guage steel. Metal Supermarkets.com would be a good place to get the sheet metal.

Happy Woodworking!

Re: Unisaw

#4

motor cover

Bill Tindall, E.TN

>My new (in 1973) Unisaw didn't come with a motor cover and I made one from 1/4" plywood. Worry about making stuff and don't fret the motor cover looks.

Re: Unisaw

#5

Ellis Walentine

Did they make them?

Ellis Walentine

>I had a 70s vintage (Rockwell era) Unisaw that I bought new in '77, and it didn't have a motor cover. I ended up making one out of plywood. It's a good cheap alternative.

Ellis

Re: Unisaw

#6

Wood? Are you serious?

Mark Goodall - ATL- tooljunkie

>Bill and Ellis. Are you suggesting that he make a cover from plywood? Are you serious? You have plywood motor covers? Don't you realize how unsafe that is?

That's against OSHA rules. That's against NEMA standards. That's against SAE rules. And IEEE rules. And ISO 9001 rules. And the Geneva convention. And InterPol.

The motor is electrical, and can overheat. A fire could start inside the tablesaw cabinet and a plywood cover is not fire-rated. You need a 2-hour fireproof rating on the motor cover. 1/8" steel is a minimum, preferably lined with asbestos and/or kelvar.

A plywood motor cover? How utterly ridiculous and unsafe.

(just kidding guys)

:)

Well I hope that it's at least painted to match the rest of the saw. Color coordination is important, you know. ;)

Happy Woodworking!

Re: Unisaw

#7

Re: Unisaw

Lester Gillett

>Thanks Guys for the info. I have seen the plywood box look and didn't

like it. will try the couple of comp. and see if i can find one. will

take a few picture of it later.

Lester

Re: Unisaw

#8

Ellis Walentine

Re: Unisaw

Ellis Walentine

>Lester, I could be wrong, but the motor cover's function is to enclose the space inside the cabinet so the dust collection port can function. If that's true, all you need is something to cover the big hole in the side of the saw. Plywood worked for me. I wouldn't be too concerned with preserving the original look.

Ellis

Re: Unisaw

#9

Re: Unisaw

Lester Gillett

>Ellis you are right as to what the cover is for. I have a small shop

and dust collecting is a must. I think when i git the unisaw up and running if i haven't found a cover i will make one of plywood. I will

just paint it gray to match the saw.

Lester

Re: Unisaw

#11

There's always fiberglass, too

Bill Houghton, Sebastopol, CA

>You could glue up some styrofoam, rasp it to a shape you liked (that would cover the motor in all positions), and learn how to lay fiberglass.

Plywood is probably faster, and certainly less fume-y.

Re: Unisaw

#12

Also safer, Mark Goodall

Bill Houghton, Sebastopol, CA

>A cop friend of mine said that, when he did highway work, he purely hated to report to an accident involving Corvettes, because, if one caught on fire, the fiberglass body burned very hot, and the fire was very very hard to put out.

Plywood would probably not burn quite so fiercely.

Re: Unisaw

#13

Re: Unisaw

Fred Davis

>Lester ,

the Unisaw I have I purchased new in 1974 and the motor cover was a option that I got .

This place has them or can get them.

http://www.ereplacementparts.com/motor-cover-p-84443.html

FredD

Re: Unisaw

#14

Re: Unisaw

Chuck in ND

>If you could find someone that has a original cover to take measurement from, I'm thinking it wouldn't be too hard to have one made up at a sheet metal shop.

Re: Unisaw

#16

Dale Lenz

Re: Unisaw *LINK*

Dale Lenz

>Will any of these work?


motor covers

Re: Unisaw

#17

Re: Unisaw *LINK*

Warren (Earlysville, VA)

>Lester,

I've also been on the hunt for the strangely elusive Unisaw motor cover.

It seems there were at least 4 different types made over the years, not counting left and right tilt variations:

1. The original cast iron "goose egg" covers.

2. A sheet metal type that attaches with 4 bolts that go into long standoffs.

3. A sheet metal type that hinges (left and right tilt variations).

4 The new black plastic ones.

You can get types 1 and 3 off ebay and you can get type 4 any number of parts vendors, but type 2 is tough.

Tool Parts Direct has exploded diagrams for every Unisaw (see link) which is a great help in figuring out exactly what to ask for.

In your case (and mine) that's Delta part number 34-843: see graphic.

The problem is that this part is apparently no longer made or stocked.

If you order a 34-843 motor cover, Delta will happily substitute the current black plastic one. I know this from experience.

Grizzly offers a cover for their 1023 model saw that's close and folks on other forums have made them work.

If you decide to have one made at a sheet metal shop, let me know.

Perhaps I could get one too and we'd both save a buck or two

Good luck,

Warren


img

Tool Parts Direct parts listings.

Re: Unisaw

#19

Re: Unisaw

Bart Leetch

>I have the above Grizzly cover on my Unisaw.


img

Re: Unisaw

#20

Re: Unisaw

Mike L, Orange County, CA

>Hi Bart,

Could I trouble you to post the dimensions of the Griz cover? Thanks!

Regards,

Mike

Re: Unisaw

#21

Re: Unisaw

Lester Gillett

>I found the cover over at the owwm site. A guy had one for sale, it

is in good shape and has all the mounting hard ware. Thanks to all

that responed.

Lester

Re: Unisaw

#22

Q for Grizzly G1023 TS owners (was Unisaw)

Mike L, Orange County, CA

>Lester was inquiring about a motor cover for his Unisaw and was pointed to a Grizzly part that may work.

On their website Grizzly specifically mentions that they will not provide dimensions for that part. They also state that they may charge a 15% re-stocking fee for returned parts.

I'm also looking for a motor cover so I was wondering, if anybody has a Grizzly G1023S or G1023S110 table saw, can you post or email the dimensions of the motor cover or the dimensions of the motor opening in the cabinet? TIA.

Regards,

Mike

Re: Unisaw

#23

Re: Unisaw

Bart Leetch

>Here you go Mike.

Approximately 16" deep front to back

Approximately 19" tall

Approximately 9" wide from saw to outside of box.

Re: Unisaw

#24

Thanks Bart!

Mike L, Orange County, CA

>