Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Pricing a Bathroom Vanity

Posts

Pricing a Bathroom Vanity

#1

Pricing a Bathroom Vanity

howard

>Folks, I want to see if my pricing compass is still correct. I just got a call from a guy who wants a 6' bathroom vanity built to "match" Stickley bedroom furniture he bought. I still think I'm pricing myself too low. I'll be using tiger maple and will need to find a stain color that works with the bedroom furniture. I'm thinking $4,200, roughly $700 per foot, though I think per foot assumptions sometimes don't work. My shop is in downstate New york. Appreciate your thoughts, I hate undervaluing myself!!

Re: Pricing a Bathroom Vanity

#2

Re: Pricing a Bathroom Vanity

Jim Shaver

>I went through the same process this past spring. I was building my own vanities for my three bathroom reno's. I priced my work out on qswo + granite tops sinks and hardware at close to 6$k alone on materials. I found pre made versions of what wanted at my local Rona Home building store including under mount sink and granite tops for a grand total of $2.5K!!

I added about another $1k in taps and was still about half price on my own material costs. The pre-made vanities are well made and of course from China, but in the end that was about $3k in savings I spent elsewhere.

Understand your cost vs hours and materials, sometimes the need vs craft are not compatible.

Jim

Re: Pricing a Bathroom Vanity

#3

What the market will bear...

John in NM

>When I worked for a shop in Arizona, almost 10 years ago, we charged about $1k per foot for cabinetry. But they were a high end furniture shop and I think were trying to discourage cabinet jobs. Your estimate is probably about what my old employer would have charged, given the size its more like furniture than cabinets, and installation is much, much easier than a full kitchen.

So if you're staying booked at $700 and making a decent profit, then stick with it. If you're more than 3 jobs behind (assuming a small shop, 1 job at a time), you might want to raise the rate.

And as Jim points out, there are competing products from China, if you're competing there, you may be better off turning down the work all together - though that's my take on Jim's post, not his. If you're doing the stain matching and design work in advance of the bid, you should charge hourly for it, refundable with the contract.

Re: Pricing a Bathroom Vanity

#4

Clint Searl

Re: Pricing a Bathroom Vanity

Clint Searl

>Material$ X 2 + $75/hour including design and installation time.

Clint

Re: Pricing a Bathroom Vanity

#5

Re: Pricing a Bathroom Vanity

howard

>Thanks for your help