Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Rockler dovetail jig gripe....and advice

Posts

Rockler dovetail jig gripe....and advice

#1

Rockler dovetail jig gripe....and advice

Terry Alexander

>Made my first venture into dovetail joints this week. Oh why did I stay away so long. With the jig....they are quick and easy....but that doesn't mean I am in love with this jig.

To set the spacing you need to loosen 4 screws and move the edge guide. Now...to get to those screws you must move the top router stop bar guide which you spent a lot of time meticulously setting. And...you must loosen the bar that holds the stock in place in the vertical position...which you obviously "tinkered" with to get the pressure just right.

Having said/typed all of that....does anybody know a way around not having to move the router stop bar?

Again...what a beautiful joint when done properly....and I made a lot of little sticks out of big sticks getting the joint just right ;-)

As always...TIA

Terry Alexander in West Texas

Re: Rockler dovetail jig gripe....and advice

#2

Re: Rockler dovetail jig gripe....and advice

Fred Davis

>Terry, the short answer for me would be , get a Keller.

"does anybody know a way around not having to move the router stop bar?"

FredD

Re: Rockler dovetail jig gripe....and advice

#3

best dove tail jig gifkins

del schisler

>only 1 set up for both pins and tails this can be got from japan wood worker This is the one i have and it works very well here is the other link to see it or go to japan wood workre http://www.gifkins.com.au/

Re: Rockler dovetail jig gripe....and advice

#4

Re: best dove tail jig gifkins

Fred Davis

>I have Dave Kellers invention , made in Petaluma ,ca and it is near idiot proof.

FredD