Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Now that sumer is over...

Posts

Now that sumer is over...

#1

Now that sumer is over...

Lee Schierer - McKean, PA

>I finally got around to putting a photo of our revamped deck on my website. I actually finished the Deck in early August. LOML wanted the deck enlarged, so I added the "octagonal" bump out, which required an additional support beam and posts under neath and some new framing. It was time for a new deck covering as the old treated lumber boards were getting pretty spongy. In fact, while tearing off the decking I actually stepped through one place. We decided to use the same plastic lumber material we used for the front deck, Veranda. I used a hidden fastener system and the Veranda comes with slots full length on the sides. For the first course, I used galvanized angle brakets to attach the board from underneath, so the finished deck surface has no visible fasteners. We also went with a full vinyl railing so the deck is now maintenance free except for annual washing. We can't believe how much larger teh deck feels now.

Just after I finished the deck I redid the picnic table top and stool tops with another color of Veranda decking material. All the fasteners are hidden and stainless steel.

Thanks for viewing.

Lee


img

Re: Now that sumer is over...

#2

Re: Now that sumer is over...

Thomas Skaggs, Foothills of Mount Level

>Nice job Lee. Now enjoy it before you need parkas to be out there!

Tom

Re: Now that sumer is over...

#3

Re: Now that sumer is over...

Tom Rex in TX

>Lee,

Beautiful job.

Question, where did you purchase the hidden fastner system?

Re: Now that sumer is over...

#4

Re: Now that sumer is over... *LINK*

Lee Schierer - McKean, PA

>I used the Phantom II hidden fasteners, but I did not buy them from Home Depot. I boought them from the link below for 1/4 the price delivered that HD was going to charge. They provide a square drive bit with each bag of fasteners. One tip lasted me about 2-1/2 bags. I went heavy on the fasteners because my joists were on 12" centers since I was expanding and existing deck. I also had to use pipe clamps to pull the boards into the fasteners as they don't slip in as easy as the instructions say unless Dick Butkis and Mean Joe Green are helping you build your deck.

Note: Verand a also has matching 1/2" thick fascia boards you can order to cover the frame of the deck.

Lee


Hidden Fasteners