We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>My wife brought home a couple of end tables that needed help. They were spotted and had rings. I bought a can of Howard's Restore-a-finish from Rockeler and went after it. The product did a very good job of restoring the original finish and now I want to apply a protecting finish. Problem, the can says not to apply poly over the product. Howard's has a wax product they recommend. So, have any of you used Restore-a-finish and what did you put on to protect?
>I used restore-a-finish on a couple of tables and on my cherry cabinets. I didn't topcoat with anything, just let it sit a few minutes, wiped it off and buffed the finish. Probably not the "right" way to use it, but I can't tell that anything has been affected. The marks are all but gone, and the finish does not rub off on anything, not even a white cloth.