Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Drawer slides - underneath Questions

Posts

Drawer slides - underneath Questions

#1

Drawer slides - underneath Questions

Terry Alexander

>The "trend" now appears to mount drawers with the slides underneath as opposed to on the sides. That is what I am seeing anyway.

So......anybody have any experience with drawer slides that mount underneath the drawers?

Couple of questions:

1. Do you buy the same slides as what goes on the sides or are they "special".

2. If "special", do they cost any more or less than traditional slides?

3. Is it any easier to mount them underneath? When mounting tradional slides (I.E. on the sides), the "wiggle room" is not very forgiving.

4. If you have experience with this methodology, do you have a preference of 1 brand over another.

5. Last Q.....what are these slides called? (if anything different ;-)

As you can see....I am pretty uneducated regarding this topic. However, I am now (finally) ready to go full force into crafting our kitchen cabinets.

As always...TIA

Terry Alexander in West Texas

Re: Drawer slides - underneath Questions

#2

JL

Re: Drawer slides - underneath Questions

JL

>Sort of tongue in cheek answer - but I do use a lot of drawer slides that mount underneath. How much do they cost - about 1 hour of set-up time and about 10-20 minutes per slide thereafter. I make mine out of maple. I do sliding dovetail slides.

They mount quite nicely. They also slot into a mortise in the back quite easily.

I've also used the Accuride steel ones. They call them center mount slides. IMO they install easier than the side mount slides. YMMV

Re: Drawer slides - underneath Questions

#3

Re: Drawer slides - underneath Questions *LINK*

Thomas Skaggs, Foothills of Mount Level

>You can use traditional slides under drawers provided you design the box accordingly. Not as easy to engage/disengage the drawer but doable.

However the slides designed for bottom mount serve well. One of the best is Blum. Here is a link....


Blumotion

Re: Drawer slides - underneath Questions

#4

Re: Drawer slides - underneath Questions

Chris Friesen

>You can use side-mount slides under the drawers but the weight rating drops by about 50%.

The slides designed for hidden under-mounting are generally more expensive than side-mount slides. You need to build the drawer box according to the instructions that come with the slides. Generally this amounts to raising the bottom up a bit in the drawer box and cutting out notches at the back for the slides to fit through.

The Blum Tandem Plus ones are awesome, but are very expensive, especially if you get the ones with "Blumotion".

Re: Drawer slides - underneath Questions

#5

Re: Drawer slides - underneath Questions

Thomas S Stockton------WebKitFormBoundaryRU4sWQOIA

>If you can get the blumotion ones wholesale they aren't to bad I just paid about $26 a pair for 18" with the locking mechanism, probably a little less if I bought a whole case. They are easy to mount and I find them a little more forgiving than side mounts.

Tom

Re: Drawer slides - underneath Questions

#6

Re: Drawer slides - underneath Questions

Jim Dillon

>Terry,

I used the Blum Tandem slides on the regular drawers (not on the lower large bins - due to mounting costs) when I did our kitchen. They are really, really nice, although they subtract a half-inch from the depth of your drawer. Woodworker's Hardware sells a lot of Blum jigs (and slides) for making the installation go more smoothly, although the jigs are not really necessary. The first drawer took me a bit of time to do, but then the remaining ones went quickly. When I shopped 5 years ago, Rockler had the best pricing on a 10-pack, or something like that. Seems like they were around $25 apiece. I still love to gently push them closed and watch how smoothly they glide. The drawer detaches very easy as well. I like them also because they don't detract from the nice wood drawer sides; I used maple for the sides.

Jim

Re: Drawer slides - underneath Questions

#7

Undermount drawer slides

Bill Hylton

>I think what you are asking about are "undermount" slides. Most manufacturers of drawer slides make 'em--Blum, Accuride, KV, etc. Part of their appeal, I think, is fashion. I don't think they are any stronger, more durable, or smoother working that side mounts. It's just that you don't see them when the drawer is opened, unless you bend over and look at the underside of the drawer.

You'll probably find, if you comparison shop, that undermounts cost as much as 50% more than comparable side-mounts. If you are talking about full-extension slides for kitchen cabinets (that is, 21" slides), you'll pay about $35 to $45 per drawer for undermounts.

Installation isn't difficult, but your drawer boxes must be very accurately sized. Not much wiggle room in the required clearances.

Bill

Re: Drawer slides - underneath Questions

#8

Re: Undermount drawer slides

Fred Davis

>In addition to what Bill said, undermount slides are far more easy to damage then side mounts,(picture your kid or short wife using them for a ladder to the upper cabinets).

I have installed side mounts by the thousands and have not in my memory every got a request for undermounts.

Considing the expense , undermounts are not worth the trouble in my view.

FredD

Re: Drawer slides - underneath Questions

#9

Re: Drawer slides - underneath Questions

Frank Mutchler

>I installed under mounts in 14 drawers when I did my kitchen remodel. The only positive I found was that they do not detract from the dovetail joints when the drawer is opened. I bought them on xbay for about what side mounts cost.