Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Quick-Connect air hose fittings-?

Posts

Quick-Connect air hose fittings-?

#1

Quick-Connect air hose fittings-?

Bill Tindall, E.TN

>I need to get some more of these things for new air hose. I haven' t bought any in years and when I did, US made quality fittings were readily available anywhere. I once tried some imports and they leaked after a short time. I don't know where to get a quality product now days. Suggestions?

Re: Quick-Connect air hose fittings-?

#2

Dale Lenz

Re: Quick-Connect air hose fittings-?

Dale Lenz

>Been told Milton makes good connectors. My no name- brand leaks also, tried to find inside seals on the web, could not find. Good luck.

Re: Quick-Connect air hose fittings-?

#3

Re: Quick-Connect air hose fittings-?

ehgauss

>McMaster-Carr. www.mcmaster.com. Search on air hose couplings

Re: Quick-Connect air hose fittings-?

#4

Re: Quick-Connect air hose fittings-?

Virgil Johnson

>See if there is a Parker hydraulic store near you. Parker Hannifin is a good brand.

Re: Quick-Connect air hose fittings-?

#5

Re: Quick-Connect air hose fittings-?

woodenleg

>Try a NAPA store. I have had very good luck with them. Dave

Re: Quick-Connect air hose fittings-?

#6

Re: Quick-Connect air hose fittings-?

BOB HAINES

>dare I say HF on this board??

Go to your local store in JC. I buy the brass ones, they are very low cost, and out of several dozen purchased, had only 2 fail

Bob

Re: Quick-Connect air hose fittings-?

#7

Clint Searl

http://www.mcmaster.com/#quick-disconnect-hose-cou

Clint Searl

>

Re: Quick-Connect air hose fittings-?

#8

quick disconnect hose couplings Pneumatic lincoln

Joel M Kramer

>The reason that I like the Lincoln coupling is that you do not need to pull the ring back on the socket(female) side of the coupling in order to engage the plug(male) side. Just push the to ends together and the coupling is mated together. The only time that you are required to pull the ring back on the male coupling side is to disengage the two ends.

This is the site where you can see the different types of fittings

http://www.mcmaster.com/#quick-disconnect-hose-couplings/=3xx2bf

This is the section on Lincoln couplings

http://www.mcmaster.com/#quick-disconnect-hose-couplings/=3xx2gy

Re: Quick-Connect air hose fittings-?

#9

MILTON is your friend

Tim Greif - West of Chicago

>Go to any reputable auto parts store and you should find a selection of Milton fittings. I have always used the Universal Interchange M-style which works with just about anybody's male plug. I would think you can buy whatever plug you can find since it's a static piece of metal. It's the female coupler that will give you fits if you buy low quality. I've been using Milton M-style couplers for 30 years with no problems. Did I mention you should get Milton M-style couplers?

Re: Quick-Connect air hose fittings-?

#10

Dale Lenz

Re: MILTON is your friend

Dale Lenz

>I'm still relatively new to air, 2-3 yrs. I always buy the wrong "style" fitting, if I think about it prior to going shopping, I'll take the male plug along with me. However, I'm usually driving around for something else and find an air and hydraulic shop and stop in. Looked last night at my air coupler, has - 1/4" IM - stamped on the female part, so is this the M style?

TIA

Re: Quick-Connect air hose fittings-?

#11

Re: MILTON is your friend

Kneale Brownson..Awaiting return to CO snows

>I have a bunch of Milton stuff in my shop, but nothing with "IM" stamped on it.

I started out with a couple used compressors years ago, then bought a portable. None matched. So I bit the bullet and started fresh with new Aero and Milton parts, and bought the "A" system--Everything has an "A" stamp on it. I can remember "A" as what I need when I go shopping for additional pieces.

Re: Quick-Connect air hose fittings-?

#12

Re: Quick-Connect air hose fittings-?

BradinMD

>I bought the Home Depot fittings and hose last Sept. They lasted less than 6 months before leaking. The hose with a 6 year warranty (now sold with 2 year) is dry rotted. I've found my receipt and expect a refund - Tool guy said they would. Now I'll purchase the Milton connections - I've used those on the farm for 30 years with no problems. The HD ones were quick that day.

Re: Quick-Connect air hose fittings-?

#14

Never had a need

Mark Goodall - ATL - tooljunkie

>I've been using the brass ones from Home Depot for 18 years and never once had a problem. I probably have a couple of dozen in use, some old ones, some more recent purchases.

I might not use my woodworking tools daily, but between the 60 tires, as well as all the air shocks and soccer balls, the compressor is one tool that seems to get used almost daily.

I do have a heavy duty ball-valve shut-off valve directly off the compressor, so the quick connect fitting aren't under pressure for very long. Perhaps that's why I've never had any problems.

I'm the first one to toss cheap tools into the garbage and invest in top quality tools, but these ones from Home Depot have never caused me any problems. But now that you've said it, I'll probably start having problems and need to buy a dozen Milton fittings.

Happy Woodworking!