Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Cleaning oak thresholds?

Posts

Cleaning oak thresholds?

#1

JL

Cleaning oak thresholds?

JL

>There is sort of a dark "stain" or grime on a couple of oak thresholds at the church. A bit more than surface dirt - really noticeable on the hinge side of the door as opposed to the knob side.

I'm inclined to use oxalic acid - but I also figured I could always try a lemon or two. Any other thoughts as to cleaning or about the cause?

I'm figuring on cleaning them, giving them a light sanding and putting on a couple of coats of spar urethane.

TIA.

Re: Cleaning oak thresholds?

#2

Re: Cleaning oak thresholds?

Bill Earl

>I had the same problem on one of my bathroom door thresholds. The tannins in the oak react with the iron in the metal dust from the hinges. A bit of moisture helps things along and creates a nice black stain.

Oxalic acid lightened the stain considerably, but didn't eliminate it completely (The stain was probably older than I am). I replaced the old steel hinges with some brass ball-bearing hinges and have not had any more problems with it. (Got rid of that annoying squeak too!)

Re: Cleaning oak thresholds?

#3

JL

Thanks, will try some.

JL

>