Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

wine cabinet question

Posts

wine cabinet question

#1

wine cabinet question

Bruce, a MN Galoot

>my son and soon-to-be daughter-in-law have asked me to make them a wine cabinet that has those slots to hold wine glasses upside down.

is there a router bit for that application, or do you just make your own?

thanks

bruce in suddenly rainy MN

Re: wine cabinet question

#2

Re: wine cabinet question

Thomas Skaggs, Foothills of Mount Level

>I make my own. There are different ways to do it. The photo here shows an easy way. Take some short lengths of 8/4 stock and cut a groove in one side for the outer parts and grooves on both sides for the inner parts with a dado blade. Install them to the top of the cabinet with the grooves facing one another with a space bewteen them and that forms the stemware slots. I like to glue some black felt to the bottoms of the slots so the glasses slide soft.

Tom


img

Re: wine cabinet question

#3

Jim DeLaney, Austintown, Ohio

Re: wine cabinet question

Jim DeLaney, Austintown, Ohio

>I've used my panel-raising bit. Makes a nicely contoured holder.

Jim D.

Re: wine cabinet question

#4

Re: wine cabinet question

Doug Reynolds in Seattle

>Rockler and lots of harware places also sell them ready made along with metal racks.

Re: wine cabinet question

#5

Thanks to all, it sure is good to know

Bruce, a MN Galoot

>that I have some options. I'm going to be close to a Rockler's tomorrow to check out the metal ones, but I'm leaning toward wood.

thanks again..

bruce