Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

>5 Oct 2009

Good Morning,

Well, it's rainy and cool here in Conway. Rained all day yesterday and then it's supposed to be kind of wet here all week. I'm ready for the rain to stop and have some nice weather for a change.

I am reading what I can find out chair repair type work so I can better educate myself before I start taking people's chairs apart. So this has been somewhat of a challenge in finding information at the level that I need so I can learn better.

I have 2 "shadow boxes" to make and it seems like I just can't get away from flatwork. My poor lathe hasn't seen me in a bit over a year now but the rest of my tools at least get an occasional rubbing of wood over their surfaces to keep them warm and happy.

Besides being very busy at the day job and just now coming off of "oncall" duty, it appears that after yet another round of layoffs, there will be more coming and now there are rumors of yet another pay cut. I guess we'll see.

The family garden is pretty much done for the year and we didn't fair too well this year because of such a cool and wet summer (highly unusual for Arkansas to be cool and wet during the summer).

Well, that's it for me...so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Making Sparks

Mark Mandell - Gone Round In Jersey

>As in running the new circuits and devices to turn half the garage into a turning "studio." Stubby's waiting patiently in the corner for power. Got the 220 line in along with the 115 GFI's. Have the track lights and the winch to ceiling-mount plus the air caster to complete, and I'll be back making shavings.

Re: WC Weekend Accomplishments....

#3

Finished My Third Changing Table

Ken Krawford

>In anticipation of the birth of my fourth grandchild, I just finished my third changing table. It was pretty straight forward construction. I made 3 extra drawers that will go into the cubby holes above the large drawers when the table later will be converted to a dresser.

The main lesson I learned on this project is that good quality drawer slides are worth the extra cost. I used Hettich this time and everything slides smooth as silk.

Thanks for looking.


img

Re: WC Weekend Accomplishments....

#4

repaired my tin roof-what a pain

john lucas

>When I bought this house it had leaks. The roof was about 10 years old. I went up there and tightened every screw. Those that didn't tighten were replace with longer screws. 2 of the leaks actually got worse. It did stop most of them.

I went back up there this weekend and pulled the ridge cap off because it looked like the leaks lined up with the joints in the ridge cap. I put caulking at each joint when I reinstalled them. I now only have 2 minor leaks.

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

Chuck in ND

>Currently working on a Thien seperator to fit into a 5 gallon bucket for a small Shop-Vac thats hooked up to a small sandblasting cabinet.

Re: WC Weekend Accomplishments....

#6

I have dust collection !

Don Orr

>I had a long weekend-Wed-Sun off. I spent Wed-Fri working on dust collection and it is now complete and functional ! I only have a small collector ( PennState 1hp 2bag) but it works pretty well as I have been reading and studying about this for a while. I have a single straight run with 3 drops-table saw which can also be used for jointer, planer and drum sander, one for the lathe, and one for the bandsaw. No bends more than 45 deg and minimal flex ducting. And I finally got my remote control hooked back up. What a huge difference from dragging the hose to the various machines. tripping over the hose and moving the machine around all the time.

Saturday I went to a turning demo in the morning and met up with some folks from another forum in the afternoon.

Sunday was spent volunteering at a local Empty Bowls benefit.

Re: WC Weekend Accomplishments....

#7

We Can Find Things In Our Pantry

Robby Wright in San Marcos, CA

>Our pantry is 3 1/2 feet wide, 2 feet deep and about 5 1/2 feet tall. It used to have four shelves, that with the 24 inch depth, made it impossible to get things in the back. So I built five shelves that slide out on full extension slides. We cleaned out the pantry (it was amazing what we found in the back) and I installed the shelves. Everything fit nicely and we can get to everything easily. Didn't know we had five quarts of cider vinegar. Guess we need to make some pickles.....

Robby W.

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

Chad Pearson

>96 M&T joints.... actually 192 mortises with a Domino. Glued them up to finish the end panels of 6 bookcases (12 ends). Need to do 48 more joints for the stretchers between the end panels. A mere 96 more mortises to finish the bookcases.

I didn't think the mortises were all that much work when I did them. Today my right forearm hurts and its difficult to type. They seemed so easy yesterday.

Re: WC Weekend Accomplishments....

#9

Finished drawer box components

George@Colonel's Workshop-Havertown PA

>Good Afternoon Dennis,

I concerned myself with making the drawer boxes for the chest of drawers. I set up two of my PC 690 routers and the PC dovetail jig, spebnt a long time adjusting it, and did drawer components for six drawers. On Sunday, I decided not to watch Kansas City/Giants because I thought it would not be much of a contest. Instead, I hauled all the drawer pieces outside and sanded them thoroughly. Beautiful day: strong sunlight. We had no family dinner party that evening.

Have a great week, Dennis

George

Re: WC Weekend Accomplishments....

#10

moved grinder

Simon St.Laurent - Dryden, NY

>When I first set up my shop, having my mini-lathe and grinder on the same wheeled cabinet seemed like a good idea. It was okay, but once I backed the grinder side up to a wall, I sharpened a lot less often, and life got frustrating.

I took an old cabinet and set it up with wheels, putting all my sharpening and honing stuff in it. The grinder's not yet mounted on top, but it will be soon. Having it _beside_ the lathe will help a lot.

I also started setting up for the crazy hardware-sorting tasks that come in reorganizing a shop that gathered dust too long.

Re: WC Weekend Accomplishments....

#11

Re: Finished My Third Changing Table

Jennifer@INdy.USA------WebKitFormBoundarycEcbeRyDg

>Ken, that is really nice. A project made with love.

Re: WC Weekend Accomplishments....

#12

How 'bout a pic?

Mike Farinella

>Getting ready to do the very same project.

Re: WC Weekend Accomplishments....

#13

Here You Are....

Robby Wright

>This is a full front view. Nothing fancy; just five simple shelves on full extension slides. I used high sides and backs to prevent shelf contents from falling off by mistake. You can see my Spam singles front and center.....

Another shot in the next post.


img

Re: WC Weekend Accomplishments....

#14

Picture 2

Robby Wright

>Showing the easy access from a fully pulled out shelf. Easy to get to everything.


img