Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Ever have one of these days?

Posts

Ever have one of these days?

#1

Ever have one of these days?

Terry Alexander

>Sunday�..slept in (all the way to 7:30)�..coffee�..no hurry. Want to do a couple of things before football watching starts.

Wife bought a piece of wood that has some pegs on it that she wants me to hang on the back of her closet door. No problem. Get drill, tape a stopping point on the drill bit, screws, screwdriver, etc. Drill, hang�.no problem. I put her robe on a peg and notice it isn�t quite sturdy enough. Remedy is to put a third screw in the middle. Get drill and bit again�no need to tape a stopping point�..OOPS�..hole in outside of door. Will have to fix that tomorrow.

So��.off to the shop. I am building a vanity for her master closet with adjustable shelves in the upper part. I need to put the face frame pieces on. Look around�.GOOD�..I have just enough stock to do the upper face frame. Measure, cut�.OOPS�.I just cut some full 1� thick stock instead of �� stock for the top face frame part. DARN. I find another piece of stock. Cut again�drill holes for pocket screws, glue and put it together. Do a dry fit before putting on the glue. OOPS�.I cut the top piece to go between the 2 vertical pieces instead of on top of them. HURRY�.take it apart before the glue sets up. WHEW�.made it. Now I am desperately looking for 1 more piece of �� stock so I can finish this �small� task and get the TV on before the first game starts. Ohhh�..Mr. frugal finds a piece of left over stock that he cut out of another project. It was put together on one side using biscuits. No problem�..it will never be seen because I will put the cut part where the biscuit will show on the ceiling side.

Drill pocket screws again�.gut the piece to go on TOP like it�s supposed to. Do another dry fit�.looks good. Now glue, and lots and lots of clamps. OOPS�..I glued the salvaged piece in upside down and you can see the cut biscuit as it is on the �show� side. No way I can take this apart.

Shut down the saw, lights, close the door�..make myself a Bloody Mary and sit down as the 2nd quarter begins.

Re: Ever have one of these days?

#2

Re: Ever have one of these days?

George@Colonel's Workshop-Havertown PA

>Well Terry,

I recall one Easter Sunday when my wife woke me up to say that each of the three commodes we had in the house was stopped up! But not one of the ten kids shared the condition.

George

Re: Ever have one of these days?

#3

" Board w/ Pegs ", ROFL !

steve mackay

>