Re: Router sparking
Larry Clinton At Frankfort (Central)., Indiana
>It may be that the brushes are just seating in. Often when brushes are replaced they only contact the armature in a small line or spot. The armature may also have some "high spots" Due to the small contact area and brush "bounce" a lot of sparking may occur. After running for a while the high spots burn and wear off both the armature and brushes and the brushes "seat in". Then the sparking reduces or quits - In the motor repair shop I worked in many years ago we would (if safe access was possible) help this by pressing a craytex (rubber abrasive stick) against the armature while the motor was running - use caution as the stick can be caught in moving parts. Otherwise I would just use the router a while and see what happens.