Help!!! Planer Blade Sharpening
Marvin Horn
>Made my first blade change on my 15" planer a few weeks ago and and have been trying to get the old blades sharpened since. Luckily I had purchased a spare set with the planer so I'm not out of service.
First off, I was amazed to find out that sharpening ran from about 50% to over 100% of a new set of blades. Anyway sent them out and they came back with a concave grind of over 10 thou. in the blades. Called the shop and they said send them back and they would regrind for free (whoopee) ---when they return from vacation.
Got the blades back again today and they are indeed ground straight but blade to blade width is 0.849, 0.866 and 0.943 inches. When sent out initially they were nominal 1" blades and had only the most minor nicks in them, nothing that showed up in the planed boards. Have no idea why they ground them down that amount.
The Grizzly manual says to insure all blades have "equal material removal"
Called Grizzly for a blade spec for blade to blade variation and minimum blade width but they need a day or two to respond. The tech told me 0.004 blade to blade but he seemed unsure if this was really blade to blade on just for each blade. Found one reference here at Wood Central for 0.003 "straight and parallel"
Does anyone here have a good spec for blade to blade variation in width ??
With shipping charges mounting up I'm rapidly approaching the cost of new blades.



