Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

>28 Sep 2009

Good Morning,

Well, as some would say, Christmas is getting closer and closer, which means that this is the queue for some woodworkers to start getting busy so they can be done on time.

Beautiful weather here in Conway with great temps...I really love the cooler weather. Been splitting and stacking firewood and this is when I'm so glad that I have help around the house to help with such a chore. One of these days, I have hopes for a wood splitter that is powered by something better than my own arms.

I've been teaching my kids about gun safety, handling of weapons, and stuff like that that I never got taught about when I was growing up and had to learn it own my own. Thankfully, I have some military training on safety that I've been able to pass along as well. I now have them signed up for Hunter's Education and Safety class on October 10th.

I'm trying to make the time to get some woodworking repair work under way, but I seem to be working a lot of hours at work and spending what little time I have left with the family. I do have some cutting boards that I need to get made as well as a couple of other things, but it sure looks like this year will be a "thin" year for holiday gifts. Overall, it's family and friends that really matter and not all the hoop-lah of how much to spend on each person. But, I'll stay away from that subject as it can make my blood pressure go up.

No other woodworking for me, just firewood work, yard work, and working on a suburban that has blown a couple of power steering hoses. I go oncall this week and I'm just hoping and praying that it will be an easy week of oncall.

So...what did YOU do this past woodworking weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

setting up shop

Simon St.Laurent - Dryden, NY

>The contractors are finally almost done with the foundation work in my basement, done enough that I can start moving things around and setting up.

I moved a pile of plywood from the inaccessible corner where it had wasted the last five years to a smarter spot nearer the door. I really do need to build a cart for this stuff, though. I also got my lathe and scrollsaw set up (about where the lumber used to be), and rearranged things so I can actually get to almost all my tools now.

I cursed a fair amount of rust, especially on a few clamps that I hadn't realized got caught up in the great basement flood of 2007. I have a lot of rust removal and general machine maintenance ahead of me, though I'm now very glad that I bought aluminum tools when I could.

I emptied out my vacuum, and marveled at the plugged-up filter given how little sawdust was actually in it. I think a Dust Deputy is probably my next shop investment.

Current plan is to be jointing and planing wood for a small bench by next weekend. I think it'll actually happen.

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

George@Colonel's Workshop-Havertown PA

>Happy Monday Morning Dennis,

My gout constrained my woodworking again, so action in th4 shop was mimimal. I did a few items on our new chest of drawers for the Guest Bedroom Suite, and tung oiled the drawer facings on the night stand. With luck I'll be able to completye the drawer boxes to the chest this week. Watched the Eagles/Chiefs game on Sunday afternoon, which was too one-sided to be any contest. Further, I have Eagles' QB issues which curtail my enthusiasm for that organization. Had it not been for the gout, I'd have been in the shop. Our #1 son brought his family to our weekly party, and our #1 daughter also attended. Two other kids and a guest, as well as 4 grandkids. We had a fun time and Sierra Nevada Pale Ale. Have a great week, Dennis.

George

Re: WC Weekend Accomplishments....

#4

Jesper, Denmark

Aahhhh...Relief....

Jesper, Denmark

>The catheter after Prostate surgery was removed on Friday. Good riddance.

The real relief was that the anticipated incontinence problem did NOT materialize at all.

Re: WC Weekend Accomplishments....

#5

Re: Aahhhh...Relief....

George@Colonel's Workshop-Havertown PA

>Good Morning Jesper,

I had to endure one of those things a couple years ago, and it was a real discomfort/pain. I am able to mentally share in your happy relief.

George

Re: WC Weekend Accomplishments....

#6

Posted my first picture on WC

Randy Johnson Connersville IN

>I finally figured out that I needed to dig out the first digital camera I ever bought to take pictures if I wanted to post them here.

The resolution with my newer camera was just to high and it was impossible to crop enough to get the file down to size.

Re: WC Weekend Accomplishments....

#7

Ellis Walentine

Quick tutorial

Ellis Walentine

>Hi Randy,

You have the wrong idea about why your photos won't post. The size of the original isn't important. My camera has 12 Megapixel resolution. What you have to do is to *resize* them to get them under the 80Kb limit I have set on our messageboards. This has been explained many times on the boards over the years, and we even have a couple FAQs on the subject of posting photos. In a nutshell, here's what you do...

1. If you have Photoshop or Paint Shop Pro or another image processing program, first reduce the image size from the giant image your camera takes. My camera takes images that are 4000 x 3000 pixels in size. Use your image processing software to reduce the image to something that will be big enough to see all the necessary detail and still fit on the page of a typical browser. 600 x 450 or 500 x 375 are about the size range you want to shoot for.

2. Save the image with a new name. If your camera image is IMG 4075.jpg, save it with another name, so you don't overwrite the large original. You might call it Randy4075.jpg or MyBlurfl.jpg or whatever. When you go to save it, see if your image processing program tells you how big the resized image will be. If it is over 80Kb, find out how you can increase the JPG compression factor to get it under 80 Kb, then go ahead and save it. Bingo!

If you don't have an image processor, Google around for a freeware picture resizer, of which there are dozens on the net, and many have been described and/or recommended by people here on our messageboards. These do all the above work for you automatically. Depending on the software, you just tell it how big (in either pixels or Kb) you need the resized picture to be and then save it with another name.

So, put that old camera away and try again with your good camera. If you like, send me an image via e-mail and I will show you how big and beautiful an 80 Kb image can be. The attached image is 600 x 450 and weighs in at under 45 Kb.

Ellis


img

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

Ron in Sterling, CT

>Good Day Dennis,

My woodworking was "fun" this weekend, as I spent Saturday afternoon watching my Grandson play Midget Football. After dinner we retired to the wood shop to spend time on his Cub Scout woodworking orientation. We went through all the hand tools, and instructions on how to use a handsaw, coping saw, and the proper way to pull nails with a claw hammer. Also involved was making a simple doorstop, and a recipe holder utilizing a clothes pin. He stayed overnight & Sunday morning we made a bird house. All work was done with hand tools, and by the end he was getting the hang of using both the hand saw and hammer. Have a good week.

Ron

Re: WC Weekend Accomplishments....

#9

Chicken house construction

Stephen Kirk in Quakertown PA

>Last week my wife and I finished a pair of 3'x3' torsion boxes that will serve as the base of the new chicken houses. Just hardboard and 1x1s. Over the weekend, I got some 2x10s and jointed, ripped planed them down to 1" strips at about 1 5/16" thick (not really important for the project). Cut grooves in each pieces to hold some hardboard panels, then made some stub tenons on the top, bottom and middle pieces to hold everything together. Lastly, I have t-nuts recesseced into all the sides of the side panels with matching holes cut in the front and back panels so that I now have a knock-down chicken house.

Reason for the extra work is that we need to put these in the barn and we have little maneuvering space, so I made a design that allows me to build major sections then easily assemble/change them in place. I can connect both 3x3 houses to make a large 6x6. I can switch from a solid door to a screen door in the summer, change the top to a screen top, etc. Kinda fun to think up and make a reality.

Re: WC Weekend Accomplishments....

#10

Ellis Walentine

Armoire progress

Ellis Walentine

>Well, it isn't quite an armoire, but it's close: 42" x 76" x 20", made of my own walnut from the property, with wormy chestnut door panels. We plan to use it, believe it or not, on the back porch, for charcoal, dog food, cat food, garden implements, etc. It feels good to build a big case piece again. I'm borrowing a Leigh jig from my buddy Art Silva to make my life easier on the case joinery. Now all I need is a PhD in jig-rigging to figure out how to actually do this. :-)

*News Flash* I also actually cleaned up my shop this weekend. When Art came to call, he thought he was at the wrong address. Last time he visited, his first words were, "Where were you when the bomb went off?" Very funny.

OTT (other than that), it was fairly routine here this weekend: planted some mums out by the mailbox, vacuumed the cars, took the dog for a walk. Jasper turned one last week so we took him to Friendly's for a vanilla ice cream cone. He thought he had gone to heaven.

Ellis

Re: WC Weekend Accomplishments....

#11

Re: Quick tutorial

Randy Johnson Connersville IN

>I knew that I had seen tutorials on sizing pictures on Woodcentral, but after spending about an hour one night trying to find one I gave up. Thanks for the refesher course. I'll print it out and try again next time.

Part of the problem is that I am just flat-out ignorant if the technology gets much past point and click. The other part is that my photoediting software isn't exactly top shelf. I never thought there would be shareware programs out there. Thanks.

Re: WC Weekend Accomplishments....

#12

Hey Ellis! Was That Pix Taken by Stephen Kirk

George@Colonel's Workshop-Havertown PA

>Over in Douglasville's new Chicken House? :<)

George

Re: WC Weekend Accomplishments....

#13

Ellis Walentine

Yes, George...

Ellis Walentine

>... he's raising exotic chickens. They don't have much meat on them, but he's quite a marketing whiz -- knows all the cardinal rules.

Ellis

Re: WC Weekend Accomplishments....

#14

Re: Yes, George...

Stephen Kirk in Quakertown, PA

>Oh you guys! Wait till I tell Teresa she has to raise cardinals too, now.

Wonder how I build a cardinal house ... ???

Re: WC Weekend Accomplishments....

#15

Re: Quick tutorial

Stephen Kirk in Quakertown, PA

>If you are running a Windows computer, I believe that the Microsoft Photo Editor that is usually installed can do this for you. Open the picture in that tool and then choose "File --> Save As". Might be "File --> Export". I'm sitting at a Mac right now trying to recall this. Good thing with pics is, make sure you save with a different name and you can't really go wrong. If you need to find the image size, just browse in Windows Explorer to where you saved it, right click and choose Properties. File size is listed there.

On a Mac - iPhoto does this pretty nicely. Open it up, select a photo, choose "File --> Export". choose the File Export Tab, Set the Kind to JPEG and then you can play with quality and size to get a good file size.

Let me know if you need more detailed instructions. I can put them together.

Re: WC Weekend Accomplishments....

#16

Since George Didn't Reply...

Mark Mandell - Gone Round In Jersey

>You ask the Pope of course.