Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

OT Question for the Arborists among us.

Posts

OT Question for the Arborists among us.

#1

OT Question for the Arborists among us.

Barry Irby

>I have a Redbud Forest Pansy that has a nearly vertical split in a branch union. The base limb is about six inches in diameter and the two leaders are about four inches. I put a nylon strap across the two limbs and wound it up tight about a year ago. It seems to be healing, but I was not able to pull the joint tight. Should I put a bolt through the split? I really hate the idea of putting metal in the tree, but other wise it will fail when the strap fails. (Right?)

If this fails the tree will be severely misshapen.

Any advice would be appreciated. What type of bolt? What metal?

Re: OT Question for the Arborists among us.

#2

Re: OT Question for the Arborists among us.

Randy Johnson Connersville IN

>1/2 inch all-thread and a couple of steel squares 2X2 inch or so with holes drilled through them for washers. I'm not an aborist, but I know a lot of people who have done this and it works.

The hardest part might be finding the drill bit to make the hole. You might have to have a bit welded or brazed onto a slightl undersized long rod.