Oh, Les Winter!
Al Stokka - Cambridge, Iowa
>Les,
Sorry for the new thread but, for some reason, I am unable to open your original post a second time.
Carr Lane Manufacturing Company (314-647-6200; www.carrlane.com) has short spring plungers which are locking (nylon locking element imbedded in the threaded body) set screws with a spring actuated Delrin plunger in the nose.
To use, you would have to drill and tap a horizontal hole through you miter gage guice bar for each plunger.
To view, go to Carr Lane's web site, click on "online catalog," and enter Carr Lane part ID cl-43-spn-1. That part ID is a 1/4-20 set screw with an overall length of .609". Other sizes are, of course, offered.
Al



