Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

WIP new kitchen island/cart

Posts

WIP new kitchen island/cart

#1

WIP new kitchen island/cart

Ned Bulken

>last spring a buddy of mine gave me a chunk of bowling lane earlier in the year. The plan is to replace our rickety kitchen table with a sturdy island. Giving up a few square feet of horizontal space, but adding more counter space, which is badly needed.



My wife would like it to be about counter top height, which at this point has things a little 'high centered' for me, but I'm working on the design still.. (need to retrofit it with a set of trestle feet, but she wants it mobile details at 11)

I sanded the lane section down to 220, rounded over the edges with a 3/8 bit, and set to making the legs, Having just built a new bed for my son, I had a bit of left over domestic conifer, and except for one design challenge (cutting up the rails to make the end pieces means you don't have rails any more...damhikt)



found one fastener... just barely grazed it with a flush trim bit, so minor harm (just one spark that I noticed), and it was just a starter MLCS bit that has more than paid for itself.



I decided to go with a bit of Greene & Greene influence on the legs. The jury is still out however, it is somewhat tippy so I may have to retrofit with a trestle foot. My wife wants it to be mobile however... There are replaceable feet on the bottom of the legs, which I had intended to replace with locking casters from woodcraft (the big 5" double locking poly wheel variety). Budget didn't allow them initially however, so I built it with 'feet' first.



all assembled ready for finish...



So far, just one session with three in one poly/blo/tung in a can from rockler. The tung oil really knocks me for a loop, so I have to finish and let it out-gas for a day, then go back and re apply.

Re: WIP new kitchen island/cart

#2

Re: WIP new kitchen island/cart

Glenn Madsen near San Francisco------WebKitFormBou

>Nicely done. At my house, that could undergo usability testing for a decade or so, before I got a definite answer.