Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Delta RAS 33-890

Posts

Delta RAS 33-890

#1

Delta RAS 33-890

Frank Mutchler

>Hi All.....anybody have experience with this saw? Fella wants $400.00 for his. It's in what appears to be excellent condition although it has been used in a pro shop for about 7 years for ripping sheets of ply. I know they're expensive when new but am wondering if this is a good price for this one. TIA


img

Re: Delta RAS 33-890

#2

Re: Delta RAS 33-890

mike from american sycamore

>that is a great price and the saw looks in great shape. I have the same model here at the school and it is 7 years old used daily and shows no sign of wear. Great for crossing cutting to rough length. I would never rip anything on a radial arm saw.

Mike

Re: Delta RAS 33-890

#3

Re: Delta RAS 33-890

Frank Mutchler

>Mike, why do you only use this saw for rough cutting? My understanding is that it is capable of very accurate miter cuts and that the settings are repeatable and reliable once properly set up.

I've also seen found some unique setups (using the pivoting arm) for cuts that would require a lot of jigging on a TS.

Re: Delta RAS 33-890

#4

Re: Delta RAS 33-890

Mike Fitterling

>A lot of folk are afraid of radial arms saws, especially when it comes to ripping with them.

Properly tuned and set up and with the proper technique ripping is quite safe, at least as safe as ripping on anything can be. Done improperly, and on an untuned radial arm saw, and it is indeed very dangerous. So, get to know your saw and how to tune it up and follow proper procedures and you will find many things that the RAS is good at.

Operating the RAS can be counterintuitive, so take the time to read about the right way to do things on it. Mastering the Radial Arm Saw byt Wally Kunkel, and Finetuning the Radial Arm Saw by Jon Eakes are good books, the former aimed particularly at Dewalt RAS owners but also with good technique sections that apply to any RAS.

That said, ripping may be easier for most on the table saw, just because the setup is simpler, but if you only have a RAS you can certainly rip on it.

Cheers,

Mike, who owns a 14" Dewalt and doesn't know what he'd do without it.