Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

OT Stanley Roofing Nailer Leaks

Posts

OT Stanley Roofing Nailer Leaks

#1

OT Stanley Roofing Nailer Leaks

Kneale Brownson..Awaiting return to CO snows

>My well-used coil roofing nailer (current model called an RN46) has started leaking air from the area of the trigger. Very frustrating to have to keep plugging in the hose when I'm trying to get a shed roofed before the next rain.

And, of course, it's the weekend so local repair shops would be closed if we had any.

Anyway, I see by the parts schematic on Stanley's website that there is a "kit, trigger valve" that looks like it has O-rings, etc. Is that the likely source of my problem? Is that something I probably can replace myself?

Any place I could likely find one of those on a Sunday?

Re: OT Stanley Roofing Nailer Leaks

#2

Re: OT Stanley Roofing Nailer Leaks

Bill Earl

>I replaced the O-rings on my Bostich coil nailer a few years back. It wasn't too hard to figure out. The Borgs typically have a display with every imaginable size of O-ring - only most of the drawers are empty. My neighborhood hardware store had what I needed.

Re: OT Stanley Roofing Nailer Leaks

#3

Re: OT Stanley Roofing Nailer Leaks

Fred Davis

>O-ring failure is about the only source of air leaks on nail guns.

Most companies like

Senco stock the replacement kit , I bet Stanley also , like plumbing leaks and septic tank overflows , only on weekends and holidays at night, in the Winter.

FredD

Re: OT Stanley Roofing Nailer Leaks

#4

Service center 1.5 miles away.....

Kneale Brownson..Awaiting return to CO snows

>Only open "normal" business hours.

Re: OT Stanley Roofing Nailer Leaks

#5

Re: Service center 1.5 miles away.....

Kneale Brownson..Awaiting return to CO snows

>Took less than an hour to get the repair. Cost $62, which probably is a little under half what I paid for the nailer 30 or so years ago, but way below what today's replacement would be.

Not too bad for a nailer that probably has thumped out 30,000 nails so far.