Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Something I always wanted to make

Posts

Something I always wanted to make

#1

Something I always wanted to make

Wayne Carson

>Ever since I got the book Fox Fire back in the 70's I have wanted to make a butter churn. Well made my lovely wife one. It is made out of poplar except for the rod it is Maple. I made everything except for the bands I had to have them made, they were the big expense I am going to try again to split the wood out of something like Siberian elm and see if it works, really cant use plane sawn wood even if soaked it just won't take the tight curve to lock with a key. Anybody have any suggestions as to what wood make a good band.

Wayne


img

Re: Something I always wanted to make

#2

Clint Searl

Hickory splits?

Clint Searl

>

Re: Something I always wanted to make

#3

Re: Something I always wanted to make

George@Colonel's Workshop-Havertown PA

>Good Afternoon Wayne,

I think that churn is a neat exercise, and I'd have been lucky to have been by your left elbow as you went thru the process. Is the maple handle equipped with lithium ion batteries or a cord? :<) Nice job.

George

Re: Something I always wanted to make

#4

Re: Something I always wanted to make

Glenn Madsen near San Francisco------WebKitFormBou

>Looks nice. I always thought elm had an interlocked grain, resistant to splitting at all. Work very green, dripping wet from the log, if you try it.

Re: Something I always wanted to make

#5

butter churn is old technology

Ron Jones

>batteries are carbon zinc

Re: Something I always wanted to make

#6

Just a little problem where I live

Wayne Carson

>West Texas is really short on trees that people tell me to try. Siberian elm is readdly available but I really have NO experience with splitting of wood. After I made a Froe I just made and tried to split a very very dry piece of oak that was a job I think next time I will try green wood. I don't know what wood will split with a froe!!

Help

Re: Something I always wanted to make

#7

Re: Just a little problem where I live

John Veerkamp, Western Mo

>Elm seldom has straight enough grain to split with a froe. Better choices are hickory as mentioned, down there maybe even pecan. Maple, cherry and whit oak are also good choices.

John

Re: Something I always wanted to make

#8

Re: Something I always wanted to make

Dick Coers

>I'll check in a couple of books, but I think willow was a wood of choice for bands.

Elm is never a good choice for splitting. Wagon wheel hubs were made of elm since you could use a section of a log, bore the hole in it, and you've got a hub.

Green oak will split with very little effort when green. Split radially, the ray flecks that show so pretty on quartersawn, are the weakest part of the structure.

Re: Something I always wanted to make

#9

Re: Something I always wanted to make *LINK*

Dick Coers

>Found a Google book link from a section of a Fine Woodworking Book. An article about makine Swedish buckets by Drew Langsner says to using young maple saplings for the hoops.

Here's another link for a guy that makes primitive butter churns. Looks like you really saved some money. Maybe drop him a note and ask what species he uses for the wood hoops.

http://www.beaverbuckets.com/ColonialButterChurn.htm


wood hoops

Re: Something I always wanted to make

#10

Actually

Bill Houghton, Sebastopol, CA

>batteries are carbon-cholesterol organic type.

Re: Something I always wanted to make

#11

JL

Re: Just a little problem where I live

JL

>Just about any type of wood that will split will split with a froe. I typically split white oak. Upon occasion I will split red oak, maple and hickory.

If you want to do it in a traditionalist manner, split out some green hickory or white oak. Shave the splints down to a suitable thickness. Keep them moist if you have to leave them for a while. Make your bands.

You can also take thin sections of air-dried wood that you cut with a band saw. Heat them in a water bath before bending.