Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Shipping large pieces?

Posts

Shipping large pieces?

#1

JL

Shipping large pieces?

JL

>I have been asked to bid on a piece. This is good. I would have to ship it to California - this is bad. I can crate it up and ship it, that's no problem.

I have gotten some preliminary quotes for shipping from my locale to CA. They vary from $540 to $600. The piece would be under 200 lbs crated and would be ~35 x 44 x 80". So - anyone have any other alternatives? I don't want to drive (5400 miles round trip).

TIA

Re: Shipping large pieces?

#2

Re: Shipping large pieces?

AZ, Colorado Springs

>If you know of someone who is moving and having their household goods taken by a moving company, perhaps you can ask them to have it shipped with their household goods. Even of there is an additional charge (usually charged by the weight of the load) the additional charge would likely be much less than the cost of a separate shipment (new paperwork, etc). Of course, you then have to get the piece from their delivery destination to the customer.

If you know someone in the shipping business you might be able to arrange a similar deal with a freight shipment -- getting them to put your crate on the back of the truck and dropping it off for you.

If you can make this work, also make sure there's a couple of strong backs at the far end to get the piece to the customer.

Good luck

Re: Shipping large pieces?

#3

"out of the box" idea

Bill Tindall, E.TN

>Once I needed to get an 1100 pound machine from Atlanta to NE Tennessee. Wife said, "put an ad in the paper". I thought that to be a silly idea but to humor her I did it anyway. The phone rang off the hook. It was near Christmas and apparently lots of people were making the trip and looking to make a buck. I went with a professional trucker coming to visit his son. He charged $150. It arrived beautifully tarped and strapped on a stout trailer, which he left for me to unload at my convenience.

Re: Shipping large pieces?

#4

also outside the box

Ben Ragusa, S Jersey

>I was talking to someone recently who told me she shipped a chair halfway across the country via Greyhound bus. Never would have thought of that.

Re: Shipping large pieces?

#5

Re: Shipping large pieces?

Lee Schierer - McKean, PA

>A few years ago, I shipped a dresser I made for my son and his wife from Erie, PA to Tucson, AZ As I recall the price was about $200. The company I worked for often shipped items and allowed me to use their contract prices if I paid the cost of the actual shipment. The shipment left from a loading dock as "common freight" and was delivered to the terminal in Tucson. I think most companies want extra for driveway delivery.

Make sure your container is well built. I made mine from 1/2" OSB and 2 x 2's, everything was screwed together. The dresser was bolted to the pallet and all the sides and top were completely enclosed in wood. Inside the dresser was padded, wrapped in plastic and braced so that the box couldn't touch the dresser.

It arrived in about a week with no damage.

Notes:

1. Gravity sometimes ceases to exist in the back of a truck.

2. Tall boxes tip over so plan accordingly.

3. If someone can stack something on top they will and it will be heavy.

4. Cardboard does not stop the forks of a fork truck.

5. Fork trucks often use your box as padding to protect their paint job while pushing thing farther into the truck.

Lee

Re: Shipping large pieces?

#6

Re: Shipping large pieces?

Thomas S Stockton------WebKitFormBoundaryRU4sWQOIA

>JL

I've used plycon.com before they offer door to door service if there is room for the truck and they do blanket wrap so there is no need for crating. Other people I've known have used them with good luck also. They also offer insurance with variable deductables depending on your budget.

Tom

Re: Shipping large pieces?

#7

Re: Shipping large pieces?

Ed Mulligan, Cape Cod

>I commissioned a couple of Windsor chairs from a guy near Philadelphia. He shipped them blanket wrapped to my door on Cape Cod (southeast Massachusetts) for $200. I don't recall the name of the web site he used but if you google around I think you will find it. Truckers use it to look for cargo when they are making a return trip empty. You post the item, start and end points and sit back and wait.

Re: Shipping large pieces?

#8

Re: Shipping large pieces?

William H. Falberg

>Why not just FedEx it? I ship my Corbel Kings that way all the time and they're about the cheapest. Call FedEx FREIGHT. You can save some by going terminal to terminal.

Re: Shipping large pieces?

#9

A Different thought.....

Barry Irby

>I think you have gotten good advice form people who have some experience. I have none, so I won't try to guess.

My thought is that whatever it is you are making, be sure the finish is thoroughly cured before you ship it. I have a friend who builds kitchen cabinets for a living. He has had some bad experiences trying to push a delivery too quickly. Bubble wrap will stick to lacquer that seemed to be dry. Cardboard will chaff things.

Re: Shipping large pieces?

#10

JL

Thanks, I ask for a quote... BTW, it

JL

>is plycongroup.com. The plycon.com was on my list of dangerous sites.