Caution: urethane tires and flat wheels don't mix
wilbur
>I don't know if anyone else has had this issue, but I put urethane tires on my 1940's era Walker-Turner bandsaw, which also has a flat profile on the wheels. I went with urethane tires based on everything I had read about bandsaw tires at the time. After a couple of years of use, I was making a cut when the bandsaw started shaking. I cut off the power and backed away, and then there was a loud BANG, and the orange urethane tire shot out of the top wheel compartment, having come off the wheel.
Checking the lower wheel, I found that the urethane tire had loosened its grip on the bandsaw wheels, and could easily be slid from side to side. Since there wasn't a side on the wheel to help hold the tire in place, like on the 14" Deltas (and their clones), it was probably a matter of time before the tire came off.
I've since replaced the urethane tires with the old style rubber tires that you have to glue on. The gluing process turned out not to be as hard or as obnoxious as I thought, and the rubber tire was much easier to get on the wheel than the urethane tire was. Plus, I can put a crown on the tire itself.
I think urethane tires may be a great option for the ubiquitous 14" Delta-style bandsaws, which are crowned and have a groove for the tire to sit in. But it may not be the greatest option if you have a bandsaw with wheels that have a flat profile.