Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Sign Boards

Posts

Sign Boards

#1

Sign Boards

Ed F.

>My neighborhood civic association has several A-frame wooden signs in need of replacement. They get set up at intersections in the community to advertise upcoming meetings and social events.

The current ones are about 30" wide and 48" tall and are made with 2x4s and 3/4" ply. They would like them to be lighter weight but still sturdy. There will probably be some permanent lettering plus space to mount interchangeable event signs.

I'm hoping some of the WoodCentral scenery builders or others can offer me some guidance.

Thanks,

Ed Freestone

Re: Sign Boards

#2

Re: Sign Boards

Grant in Iowa

>I'd suggest Aluminum angle and or tubular frames. Weld or bolt together a pair of box frames for each sign. Could even make a lighter weight version using just tubing held together with hinges. Use the sign board to fasten the whole thing together.

Then for the sign surface, 1/2" MDO (medium Density Overlay). This provides a nice paintable surface while being durable to weather (the stuff is often used for outdoor road signs). For an upscale look you could put a decorative frame around the plywood surfaces.

BTW, they are known as "sandwich board signs" or "sidewalk signs" if you want to look online for more info.

Regards,

Grant in Iowa

Re: Sign Boards

#3

Re: Sign Boards

Dick Coers

>I use medium density polyurethane foam board all the time at my day job. It is generically called sign board by a lot of shops. It machines like a dream, paints really well, and is very strong. We use 15 pound per cubic foot material (not far from basswood). It likes all weather except the sun, so a coat of latex solves the ultraviolet problem. I suspect one of your concerns with reducing weight, will the wind off a semi at speed, blowing them over. The only down side to the MDU foam is that it is very expensive. We use 6" thick in the model shop and it is over $1200 for a 4'x8'. Stop by your local sign shop that does 3D carved signs and talk to them about the material.