Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Motorizing an Outdoor Porch Swing?

Posts

Motorizing an Outdoor Porch Swing?

#1

Motorizing an Outdoor Porch Swing?

Bob Willey

>I recently purchased a two person outdoor swing for the backyard. I would like to set up some type of electric motor with a cam actuator to swing the swing gently so I don't have to keep running up when my wife beckons for more swing action.

I considered using a baby swing setup but I don't believe it is powerful enough to support two adults.

Any suggestions would be appreciated.

Re: Motorizing an Outdoor Porch Swing?

#2

Grandkids!

Lee Schierer - McKean, PA

>

Re: Motorizing an Outdoor Porch Swing?

#3

Re: Motorizing an Outdoor Porch Swing?

Bob Willey

>They all live out of state unfortunately.

Re: Motorizing an Outdoor Porch Swing?

#4

Re: Motorizing an Outdoor Porch Swing?

Curly Smith

>If you approach the problem as a pendulum and you're asking "how much energy do I need to add to keep the pendulum swinging" then the answer is not much. Note that this is very different from the energy required to start the pendulum swinging.

This simple online calculator will tell you how much energy is in your pendulum system:

Simple pendulum

For example, if we assume a 7' pendelum, 20 degree swing, 600 lbs for the swing and adults, and 1g then we get: max height = 0.42', a period of 3 seconds and 253.3 ft-lb of energy.

Each subsequent swing will be less because of air resistance and friction by a factor along the lines of (h/h1)^0.5 = e, where e must be determined experimentally. But, if we simply assume that e is 0.90 then we find that the system loses 0.1 * 253.3 ft-lb = 25.3 ft-lb per period or 8.4 ft-lb/second = 11 watts (or 0.01 hp).

The real answer will depend on how efficient your pendulum is but it should require very little energy.