We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Making an adjustable marble roll type game using 2" pvc. Plans call for using magnetic tape. Pieces get moved around on metal sheet by kids. Bought 1" tape from hobby shop. Tape 1" x 4" will barely hold 5 ounces and is not strong enough to use. Tape had no discription. Christmas is coming! Any suggestions? I can use rare earth magnets. Is there any method of testing other than trial and error? Jerry Gibbs
>Rare-earth magnets should work. Lee Valley has a good selection, and if I recall correctly, they specify the holding power of each size in the catalog.
>I use the Business card magnets you can get @ an office supply here at work to hold notes on the front of printers. They work great for holding and have a peel and stick side for labeling.
If you can use rare earth magnets, check out KJ Magnets. I have purchased a couple of bags of small magnets from them. They are absolutely the cheapest I have found anywhere...a fraction of the price from most other suppliers. Particularly, check out their "surplus" section.
These are strong enough that I use a 1/2" button to hold a 1/2" wrench on one end of my lathe. I use 3 in line to hold the 6" tool rest on the other end. Many other sizes available.