Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Cutting Board Question

Posts

Cutting Board Question

#1

Cutting Board Question

Craig in Silverdale

>I want to make a cutting board for my daughter. HAve several different pieces of scrap in my bin. Question is, can I use Wenge in a cutting board safely? I've been told to never use Purple Heart in anything that be used with food. Which boards shouldn't I use when it comes to food?

Re: Cutting Board Question

#2

Re: Cutting Board Question

paul in AZ------WebKitFormBoundary+isMX5X2paiDYC5e

>Absolutely. Gorgeous wood.

I've made several with end grain wenge in combo with several other woods like cherry, walnut, and most of 'em with maple predominating. No special provisions for glueing -I mostly used water resistant Tightbond III- and there is no color bleeding. I finished with several wipe on coats of mineral oil.

With oil wenge gets as dark as ebony so you may not want to use it for the dominant wood.

The only down sides to wenge are that it is tougher than teak and hard on sharp edges; and the sawdust is quite irritating -to me at least. Pretty nice wood to work though.

Re: Cutting Board Question

#3

addendum

paul in AZ------WebKitFormBoundary+isMX5X2paiDYC5e

>I think that most of the "woods not to use with food" stuff is hogwash.

It may be relevant to critters like termites that the eat wood but a cutting board??? How much wood will you eat?

Same goes to those who oppose mineral oil finish. The worst thing that can happen is if you swallowed a couple of tablespoons you'd get diarrhea. I get my mineral oil in the 'digestive' section of the pharmacy where it is sold as a laxative.

Re: Cutting Board Question

#4

Re: Cutting Board Question

Ron Jones

>I have seen some beautiful cutting boards made with some purpleheart included. I tend to put things like that in the same category as the statements that cutting boards should never be made of wood. Horse hockey!! Thanks Sherm Potter.

Re: Cutting Board Question

#5

JL

Re: Cutting Board Question

JL

>My personal feelings (as opposed to anything else) - I would never use an extremely porous wood as a cutting board wood. E.G. - I would not use red oak - too easy to "pack" the pores with food and crud.

Re: Cutting Board Question

#6

Re: Cutting Board Question

Barry Irby

>Make the board out of strips of wenge/maple/wenge/maple/etc. The maple strips should be about twice as wide as the wenge strips. The wegge strips should be about 5/16" wide.

Leave the steaks on the cutting board for about an hour. Gives them those nice attractive stripes without have to fire up the grill.

Sorry, Couldn't help it. ;)

Re: Cutting Board Question

#7

Re: Cutting Board Question

Dave Paine

>I have to join the folks who reponded that many woods can be used for cutting boards. Hardness and tight grain are preferred. As other have said, avoid open pored woods like red oak. Too easy for bacteria to accumulate.

My latest board is purpleheart sides, hard maple and bloodwood for the main body and bubinga for the ends.

I like to use Wenge for Inlay as a dark contrast. I find it splinters very easily, so pay close attention to direction of the grain if you will be planing.

I have not use Wenge in the cutting surface of a board, but it seems other have.

I love the dark contrast of Wenge. It is a shame that like Purpleheart, the face grain light/dark "waves" in the grain almost disappear when a finish or oil is applied.

Re: Cutting Board Question

#8

Re: Cutting Board Question *LINK*

Rickey LoDico------WebKitFormBoundaryAZXq5wtv+MOO2

>Purpleheart make for great cutting boards. I've made quite a few using it in combination with other woods and all those I gave them to are still healthy. My last one was PH, sugar maple and cherry.


img

NJ Custom Woodworking

Re: Cutting Board Question

#9

Re: addendum *LINK*

Rob Stokes in N. Vancouver

>I've never heard of anyone opposed to using mineral oil as a cutting board finish. Where'd this come from?

the irony to this, is I JUST sat down after scraping and oiling (with mineral oil!) my WWII maple cutting board.

more on that here:


img

Grandma's cutting board

Re: Cutting Board Question

#10

not vegetarian. go figure.

paul in AZ------WebKitFormBoundary+isMX5X2paiDYC5e

>

Re: Cutting Board Question

#11

Re:Trying the pic again 

Rickey LoDico

>


img