Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Vinyl post cap removal

Posts

Vinyl post cap removal

#1

Vinyl post cap removal

Doug Ridley

>I assume these vinyl post caps are glued on. Can I just tap on them to remove them? Will the glue bond break? Ideas please.

Re: Vinyl post cap removal

#2

Re: Vinyl post cap removal

Ken Oakley-Sunny St. Cloud, Fla.

>Mine juat sit in the post. Tap gently with a mallet and see if it moves

Re: Vinyl post cap removal

#3

Re: Vinyl post cap removal

Barry Irby

>I would put a block of wood under he edge and give it a rap maybe on all four sides. Then perhaps a sharper rap.

If that did not work I would put a sharp chisel under the edge on each side and give it a light rap and see if that cracked any glue that might be present.

Who knew rapping was a woodworking skill? Oh, wait, this may not be actual wood working.

Re: Vinyl post cap removal

#4

Re: Vinyl post cap removal

John Veerkamp, Western Mo

>Doug,

If they used pvc glue, you're out of luck. It is what they use to glue plumbing pipe. It actually disolves the plastic to bond. Good luck.

John

Re: Vinyl post cap removal

#5

Re: Vinyl post cap removal

Lee Schierer - McKean, PA

>I just completed a railing on my beck deck and teh caps on my posts came with a small tube of glue, whicnh I used on the four tabs midway on each side. The cap slipped over the post about 1/2"

It appeared to be a PVC glue so it migh be tough to get them off.

Lee

Re: Vinyl post cap removal

#6

Re: Vinyl post cap removal

Doug Ridley

>Thanks, that's about what I figured.