Wood gloat
Stephen Kirk in Quakertown PA
>A while back a neighbor took down a dry standing maple and wondered if I wanted some of the logs for lumber. When we dropped it, we thought it would be useless as it almost fell over due to the center completed rotted out. But, we cut up a foot or two and hit solid wood. Plus, from the ends it looked a bit spalted. So, I took a pair of 8 footers and a pair of 6 footers. I had about a 25" diameter at the base, and it didn't taper much.
Finally had it sawn. Just went with flat sawn since the yield otherwise would have been rather low. A number of boards have decent spalting and figure. This maple will be more decorative, as I have lots of color streaks throughout. The top log, which had some knots, I asked the sawer to leave a live edge on and cut at 8 quarters. Some of those look nice and will make nice table tops, benches, etc. Got about 450 bd ft in total. Hard to figure out a price comparison to bought lumber, since I cut this specifically to get knots and imperfections - which you don't normally find in the lumber yard.
The pic isn't the best - it was getting dark, but you can see some of the figure and color.
It's all stacked and stickered out in the shed. I'll forget about for a year or two and then see how it looks. This is the first time I am drying inside a closed structure and I can already see I'll need to regularly open the tarp shed or cut some vents up in the top. Gets moist fast in there. And this shed also holds my excess dried lumber - hey, I only get a limited amount of space so I have to do what I can.
All in all, another fun load to get.
Pic isn't the greatest - it was getting dark, but you can see some of the color and figure. Wood behind it is my already dried stuff. Got the tarp shed to handle storage since I can't fit it in the shop.



