Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Changing from Senco to PC finish gun?

Posts

Changing from Senco to PC finish gun?

#1

Changing from Senco to PC finish gun?

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>Do any of you have experience with both? I have been using Senco for about 30 years, but the last time I paid for a re-build, it cost nearly as much as buying a new gun.

I am thinking of buying a new gun instead, but have a lot of fasteners that I would like to use. Can you use the 15 ga. Senco fasteners in the PC guns, or is there something about the angle that they are stacked different?

Re: Changing from Senco to PC finish gun?

#2

Re: Changing from Senco to PC finish gun? *LINK*

Mark Mandell - Gone Round In Jersey

>If your nails are set at the 33� slant and fit the Senco AirFree 41, FinishPro 35, Finish Pro 41XP, SFN40, SFN1+ or SFN30, they should (according to McFeely's) be ok in a PC DA250A or CDA250 but will not fit the PC CFN250, FN250 & FN250A.

For a compatibility chart go to the link and match the letter codes.


Nial Gun Codes

Re: Changing from Senco to PC finish gun?

#3

Re: Changing from Senco to PC finish gun?

Fred Davis

>Occasionally having to use a O-ring replacement kit is a maintenance item, not a design flaw and easy to do yourself.

If you go back as far as the Senco Cast Iron bodies as mine are , you should keep them, they are the best.

Also the older models need a drop or two of oil before use, make a habit of it.

As for any other brand nail gun, they all need maintenance from time to time, none less then a Senco I would bet .

In addition, your Senco nails are coated part way with a heat activated epoxy not found on other brands.

FredD

Re: Changing from Senco to PC finish gun?

#4

Thanks Mark

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>That was a great link, which has made it easier to look at other options too. K

Re: Changing from Senco to PC finish gun?

#5

Re: Epoxy

Mark Mandell - Gone Round In Jersey

>Fred,

In my area, all the finish nails are resin-coated. I use Falcon brand in my Bostich N62FN [great finish gun btw] and they are very hard to pull out in one piece because of the hot melt glue coating. I do, however, use Senco brads in the little gun, and Pasload stock in the framer.

Re: Changing from Senco to PC finish gun?

#6

Re: Changing from Senco to PC finish gun?------Web

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>Dang Fred, You must really have some old equipment if yours are cast iron. My oldest gun is a Sn-1, serial #697321. Seems like I heard once that the first two numbers was the year made, but it is cast aluminum. I think I bought it used ~ 74.

The one I am thinking of replacing though is the SFN 2 which I bought new a few years later in the seventies. Back when I bought both of these, the salesman gave them a lifetime service guarantee, as long as I bought his fasteners. I thought that was too good to be true, even though it lasted about 5 years.

Re: Changing from Senco to PC finish gun?

#7

Re: Changing from Senco to PC finish gun?

Bart Leetch

>Dang Fred, You must really have some old equipment if yours are cast iron. I have my Dad's guns & the earliest ones go back the about the mid 60's & they are not cast iron. Chuckle.... Where did you get your guns off Old Iron Sides... Just laugh I'm pulling your chain He He He...

Re: Changing from Senco to PC finish gun?

#8

Re: Changing from Senco to PC finish gun?

Fred Davis

>If you want some pics and or gun weights , let me know ,hardly anybody ever confuses Cast Iron with Aluminum , but anything is possible I guess.

FredD

Re: Changing from Senco to PC finish gun?

#9

That must have been from the good old days

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>when they shot square \ cut nails, that clipped them off a sheet right in the gun.

It is hard to find the flint drive bars anymore though. %\]

Re: Changing from Senco to PC finish gun?

#10

Re: Changing from Senco to PC finish gun? *LINK*

Fred Davis

>Well Bart, what I have is a really old brain that has lead me to think , because of the significant difference in weights of older and newer guns of the same model , that they were cast iron.

I was Wrong, badly mislead, entirely befuddled, they are cast Aluminum.

Here are some I currently have in the shop, for both exterior and interior work.

The little staple gun on the bottom right is a gem , it shoots colored staples to match wood trim ,from 3/16ths to 5/8ths in length.

3/16ths is a hand length , for instance , if you want to fasten two door skins pieces together.

Note the oldest guns have the word Senco in script.

http://picasaweb.google.com/FredD17209/Senco?feat=directlink

FredD


http://picasaweb.google.com/FredD17209/Senco?feat=directlink