Re: Circulation numbers and the winner is ...
Charlie Self
>I'm probably wrong, but it strikes me that back in the '60s and '70s and even into the '80s, there was a great deal more creativity in magazines like TFH, Popular Mechanics, Mechanix Illustrated and so on...in the late '70s, early '80s, I did an article for MI on forming false box beams in a living room, using rough cut lumber. Later that same year, I did a piece for them on removing a set of head-ducker basement stairs and replacing them with stairs with a small landing that allowed you to stay upright all the way down. Back then, I was 6'2", so it helped alleviate backaches. I built a paving brick patio on the back of this house back in '91 for MI, too. At that time, soft set pavers were less common than they are today.
I did a piece for Popular Science on replacing an old roof with a new type of Masonite faux shake, and a piece on replacing wood tool handles for Popular Mechanics--lessee, that one was in '78. For TFH, in the early '80s, I built a carpenter's toolbox and did some other small project articles, plus a fairly large piece on AWF, all-weather wood foundations.
Today, it often seems that the primary criterion for an article on home improvement is cost: if it doesn't cost at least $5,000, the magazine feels its readers won't be interested. Fifteen or 20K is a nicer target, or so it often seems.
Maybe so, but in the '60s, '70s and '80s all these magazines had increasing circulation (except MI, which, by '91, was in the process of disappearing, though it hung around for a few more years). One has to wonder what woodwork/homeowner magazines have increasing circulation today, magazines that are not affiliated with TV shows.