Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Benchtop glue up question

Posts

Benchtop glue up question

#1

Steven Antonucci

Benchtop glue up question

steve antonucci

>I will be laminating a benchtop from Quartersawn and riftsawn white oak (I have it on hand, all shorts...) I also have a gallon of veneer glue staring at me. Aside from the longer set time, any downside to using veneer glue to do my glue-up?

I am in no hurry to get this done, as it requires a lot of sweat equity to make the oak usable. If I do a little bit here and there over the next few months, so be it...

Thanks for insight, flat guys!

Steve

Re: Benchtop glue up question

#2

JL

Which veneer glue?

JL

>They aren't all quite the same. I don't see any reason why not though. I would have any problems with a PVA veneer glue. If it were hide veneer glue, I would want a good finish on the work bench.

Re: Benchtop glue up question

#3

a penny saved......?

Bill Tindall, E.TN

>I expect that $2 of yellow glue would put the bench together. As cheap as I am I would still not use anything but the most appropriate glue for this task considering its almost insignificant cost.

Re: Benchtop glue up question

#4

Steven Antonucci

It was on hand in large quantity

steve antonucci

>Was trying to use it up.

Ran out of energy before I got to it today.Will do it tomorrow...maybe. Football might just suck me in instead...

Re: Benchtop glue up question

#5

Re: Benchtop glue up question

Jesse Cloud

>I would be a little wary, though we still don't know what type of veneer glue you have...

Veneer glues are sometimes formulated to be rigid and not give, so that veneers will not separate at joints. Your benchtop is going to move and a rigid glue might cause some cracking.

Bill nailed it, all things considered, the cost of glue is pretty trivial, not worth a risk in my opinion.

Re: Benchtop glue up question

#6

yet another issue

Bill Tindall, E.TN

>Some veneer adhesives are formulated with fillers so as to not bleed through the gossamer films they call veneer now days. These fillers don't add adhesive strength to butt joints. If one product did it all there wouldn't be different adhesives.

We tried........Reminds me of my uncle who would tell of the person that ruined a $1.29 jack knife skinning a [flatulence] to save a "cent". Uncle Willy had a lot of these wisdoms to offer. Most were colorfully worded.

Re: Benchtop glue up question

#7

Steven Antonucci

You talked me out of it

steve antonucci

>I have some TiteBond III and some old Gorilla Glue to use up. I'll save the veneer for veneering...

Thanks guy for saving me from the inevitable crap I was getting myself into...

S

Re: Benchtop glue up question

#8

Re: You talked me out of it

Glenn Madsen near San Francisco------WebKitFormBou

>Now throw away the old Gorilla glue, and you're good. That stuff doesn't age well, going bad in a single digit number of months after opening.