Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Making a weatherd board

Posts

Making a weatherd board

#1

Making a weatherd board

BrianA

>I am making a fireplace mantle out of pine. Just a box. I want to make it look like a weathered barn board, or as close as I can. Just so it does not look like a cheap pine box, of course which it is ;-) Any ideas how I can make this box into something that may make a good looking mantle?

Thanks

Brian

Re: Making a weatherd board

#2

Re: Making a weatherd board

john lucas

>I've never looked into it but the model railroad people have a paint or some chemical to age wood to make it look like barnwood. I think I saw it in MicroMark tools catalog. They do have a website I believe.

Re: Making a weatherd board

#3

Re: Making a weatherd board

Bill White

>My first response was to get a bucket of weather and mop it all over the boards, but I figgered that I would be banned for life from Woodcentral.

Are you wanting a roughsawn and dirty look? Old, crackled paint look?

Give us a little more info so we can help.

Bill

Re: Making a weatherd board

#4

Re: Making a weatherd board

Lee Schierer - McKean, PA

>Years ago I made a scrap book cover from plywood and it was supposed to have a weathered wood look. We used a wire brush wheel to remove the soft wood, leaving behind the harder areas of the grain. With a little care and some dye you could make a pine board look weathered or else stick it outside and wait 3-4 years.

Lee

Re: Making a weatherd board

#5

Ellis Walentine

What's wrong with the real thing?

Ellis Walentine

>Weathered barn wood should be easy to find. Use the real deal and save yourself a world of hassle.

Ellis

Re: Making a weatherd board

#6

That was my first thought

Nat Robison

>Try Craigslist or maybe an architectural salvage company.

Re: Making a weatherd board

#7

Re: Making a weatherd board

Grant in Iowa

>Pressure wash it.

Take it to a coin operated car wash and pressure wash it for a while. Then maybe distress it with a fist full of chain and then let it weather outside for a while to get pretty close.

Re: Making a weatherd board

#8

Re: Making a weatherd board

Kneale Brownson..Awaiting return to CO snows

>Most "natural" fake weathering of Pine I've seen was done with a sandblaster and dye.

Re: Making a weatherd board

#9

Re: Making a weatherd board

Rick in Colgate, Wi

>Sandblasting would work, you could always rent a blaster and compressor if you dont have access to one.

Re: Making a weatherd board

#10

Re: What's wrong with the real thing?

Barry Irby

>I used to make Barn Board Picture frames. I tore a few boards off barns on a family farm, but when demand picked up I went to a local lumber yard and asked them about how to weather the wood quickly. Turns out they were in the habit of selling such wood to builders of movie sets. They called it "characteristic wood". They saved lumber off the tops of piles and set it aside for the purpose. They actually sold it to me for the same price as regular pine. (Still not sure whether I got a premium aged product for a reasonable price or bought their old weathered crap they were about to throw away for full price.) You might check around.

Also, Olympic used to make Weathering Stain. If you can find some you could sand blast or wire brush and antique it to your hearts content. The stain was designed to weather quickly to a silvery gray.

Re: Making a weatherd board

#11

Jim DeLaney, Austintown, Ohio

Re: Making a weatherd board

Jim DeLaney, Austintown, Ohio

>I've used a lye solution (Careful!!! It's VERY caustic) or Easy-Off oven cleaner. Brush or spray it on and leave it for a while. Neutralize with vinegar.

Pressure wash or wire brush the wood first to get more texturing.

Re: Making a weatherd board

#12

Re: Making a weatherd board

BrianA

>Thanks for the advice, I'm leaning toward wire brush and power washer since I have both. I'm using pine because I have it and need to finish the basement to try to sell my house. Hopefully it will sell before the board would look weathered out side, but in today's market you never know.

If I wire brush and power wash, how would you stain it to look old?

stain a few different colors? I only care that it does not look like it is, a cheap couple of pine boards.

The crackle Idea is good too.

Thanks again

Brian

Re: Making a weatherd board

#13

Re: Making a weatherd board

GalenV in Iowa

>The wire brush with the grain is the way I would go but you need to hit it with a light sanding to knock the sharp points off. CABOT has a weathering stain that is a silver gray that is not a bad finish.

Hard to beat using the real thing as some have noted.