Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Shaker Style Tables,Chapter 5

Posts

Shaker Style Tables,Chapter 5

#1

Shaker Style Tables,Chapter 5

Andy Lincoln,in Dearborn MI

>Hi All,

I am continuing my process in making a set of shaker tables. As time for the wedding draws ever closer (Saturday the 12th of Sept.) I am concentrating on the two tables made of Red Elm. The steps involved in the other tables are the same, with the exception of the finishes. I am not sure yet what those will be. On the tables made of Red Elm the finish will be an water-based aniline dye in a med. brown with several hand rubbed coats of Waterlox wiping varnish.

I began this segment by milling the stock for all the tops and gluing those boards into larger pieces to make the 18�x 18� tops.

From Shaker Style End Tables

After all the wood was glued up I was able to run the stock through a Delta 18/36 Drum sander, which is quite helpful in getting nice smooth panels.

This panel happens to be made of Walnut.

From Shaker Style End Tables

While the glue was drying on the tabletops I set up my router to mill the half-blind dovetails into the drawer faces. This set-up uses a �� template guide bushing in the router as well as a homemade template to cut the half blind pins in the drawer face stock. This is based on an article in Popular Woodworking by Troy Sexton entitled $19.99 Dovetail Jig. I found it to be a simple, effective way to cut these joints without a lot of expense or complicated jigs. I happened to have the template available from a previous project, a pair of Walnut tables I built for my wife, that is the same size as needed so I spent no time making another.

From Shaker Style End Tables

Here you can see the results of the router work:

From Shaker Style End Tables

I then hand cut the tails on my poplar drawer stock and fitted those to the drawer fronts. Although they are not perfect by any means they do look somewhat better that the dovetails I used to join the top rail.

From Shaker Style End Tables

Here are the tables with the drawers fitted and ready for finishing. In some of the photos the wood is wet. I am pre-raising the grain and will knock the nibs down with sandpaper before applying the dye. I am doing this write-up while waiting for the water to dry.

From Shaker Style End Tables

From Shaker Style End Tables

From Shaker Style End Tables
.

I would have liked to take more photos of the drawer construction but for these two tables the looming deadline is approaching. I can possibly document the drawer construction when I head back into the shop to work on the other 6 tables.

Thanks For Looking,

Andy

Re: Shaker Style Tables,Chapter 5

#2

Very nice!!

doug f, san clemente, ca

>Andy - Those tables are going to make outstanding wedding presents, something to be treasured for a long, long time.

Keep up the marvelous work and thanks again for the tutorials.

Doug

Re: Shaker Style Tables,Chapter 5

#3

Looking Good.....

Barry Irby

>I would like to know more about how you do the dovetails.

I see you taper the legs more than I do. My engineering brain struggles with making them that slender. Yours look better than my fat ones. As you know, I like to strap lead weights on mine and see if I can break them.

Thanks for keeping us posted.

Re: Shaker Style Tables,Chapter 5

#4

Re: Shaker Style Tables,Chapter 5

George@Colonel's Workshop-Havertown PA

>Hello Andy,

They are elegant, for sure. The dovetails look great. I haven't worked elm very much, so I am anxious to see the finished product.

George

Re: Shaker Style Tables,Chapter 5

#5

Dovetail jig article *LINK*

Andy Lincoln,in Dearborn MI

>Darn computer got me again,there was supposed to be a hyperlink in the text that would take you to the article on the dovetail jig.DOH!!

sorry about that.

Andy


$19.99 Dovetail Jig

Re: Shaker Style Tables,Chapter 5

#6

Re: Looking Good.....

Chris Friesen

>Wood can take an amazing amount of pressure with the grain. Your basic American Elm can take 38000kPa (roughly 5500 pounds/ sq in). The legs on that table taper down to 5/8", so the legs on that table could theoretically support about 8600 lb.

These figures came from Chapter 4 of "Wood handbook : wood as an engineering material", put out by the USDA Forest Products Laboratory.

http://www.fpl.fs.fed.us/products/publications/several_pubs.php?grouping_id=100&header_id=p

Re: Shaker Style Tables,Chapter 5

#8

Looking very good Andy.

Victor Parisian

>Keep up the posts.

Victor