Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Reversing yellow glue

Posts

Reversing yellow glue

#1

Reversing yellow glue

rj in selby

>Many years ago I attempted to repair a broken door on a hoosier cabinet. I did a less than stellar job. I would like to take it apart and repair it correctly. How do you reverse or disolve the yellow glue to take it apart. Thanks all.

Re: Reversing yellow glue

#2

Re: Reversing yellow glue

Howard Acheson

>Heat from a heat gun or hot water with some vinegar added.

Re: Reversing yellow glue

#3

Re: Reversing yellow glue

Kneale Brownson..Awaiting return to CO snows

>Very difficult to reverse. Heat and moisture supplied long enough should turn it into a gooey mess that will allow disassembly but be difficult to clean off. You'll need to clean it completely because it will not reglue and you can't glue glue to glue effectively.

Re: Reversing yellow glue

#4

Re: Reversing yellow glue

Nat Robison

>I was able to reverse a glue joint using two halogen work lights, the kinds that are readily available at Lowe's or HD for not a lot of money. It probably took 15-20 minutes of heat but this joint was only a day old. Not experienced enough to know how it might work on an older joint.

Re: Reversing yellow glue

#5

Re: Reversing yellow glue

Ace Karner

>You are about to learn why us old galoots use hide glue. :)

Re: Reversing yellow glue

#6

JL

Re: Reversing yellow glue

JL

>What wood?

I have been reasonably successful in using a variant of the method that Howard describes. I use 1/2 vinegar and 1/2 warm water. I brush it on, let it sit and then wipe it off. After a few applications, I take my heat gun to the joint and give it a few passes. I then "work the joint" by hand. I then repeat the process. It takes a while, but it gets there.

If you have iron containing substances near the joint - remove them. You can get a nice dark stain. If you have oak or other woods that are rich in tannins you can have problems with staining. Use distilled or iron-free water.

Re: Reversing yellow glue

#7

Re: Reversing yellow glue

rj in selby

>Thanks all for the suggestion's. I will try the vineger/water solution with some heat. It is an oak door. If it does stain I have some quarter sawn oak to make new stiles and rails. The door panel would be hard to match with the other doors.

Re: Reversing yellow glue

#8

Re: Reversing yellow glue

john lucas

>I use white vinegar to get yellow glue out of clothes, so it does dissolve the glue. Heat also will break a yellow glue joint, so it makes sense the application of both should do it.

Re: Reversing yellow glue

#9

Vinegar?

Bill Tindall, E.TN

>The polymer that is used in formulating yellow or white glue is not going to be soluble in any liquid that is largely water. However, hot water will soften this material, no vinegar needed, and in this softened state it readily washes out of bristles, clothes or off metal.

It seems to be common knowledge that vinegar should be a component of glue removing solutions. However, does anyone have any experience that the addition of vinegar has a beneficial effect on this stuff above and beyond the effect of just hot water?

Re: Reversing yellow glue

#10

Re: Vinegar?

Doug Ridley

>Don't know about vinegar vs' hot water but I used to cook the stuff in an 18,000 gallon reactor and in transferring it to RR cars, trucks and drums it got on everything. I can tell you that Ascetic acid WILL dissolve it and vinegar is a weak solution of Ascetic acid. It should soften it.

Re: Reversing yellow glue

#11

I believe its a hold over from hide glue...

John in NM

>Just gets applied to PVA's as well.

Re: Reversing yellow glue

#12

that makes sense..

Bill Tindall, E.TN

>I can see how vinegar would be beneficial for softening hide glue, which is a protein. .