Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Woodcraft drill bits (twist and brad)?

Posts

Woodcraft drill bits (twist and brad)?

#1

JL

Woodcraft drill bits (twist and brad)?

JL

>People have a tendency to lose things. Theatre people have a tendency to lose more things.

I am contemplating buying the 170 piece set from Woodcraft for the theatre. It is relatively inexpensive. The sizes are relatively good for predrilling as well as the few through holes that we have to do. The following questions come to mind.

A) Do ya'll think this is a reasonable deal?

B) Twist or Brad point?

TIA

Re: Woodcraft drill bits (twist and brad)?

#2

Re: Woodcraft drill bits (twist and brad)?

Dave's Not Here

>Considering the type of use they probably will see I don't see where you can go wrong with either. If wood is all you'll ever be drilling into than I'd go the brad point route but the twist style would be more versatile. I can't speak to the quality of these particular bits however I'm sure that they are throw away quality. But, if you're just going to lose them anyways that probably doesn't matter.

Re: Woodcraft drill bits (twist and brad)?

#3

Re: Woodcraft drill bits (twist and brad)?

AZ in Colorado Springs

>I bought the set (brad point) on sale. I think it was a good deal, but I have noticed that some of the bits were dull the first time I used them. Not the majority, buy any means. But there's plenty of copies of each size.

Re: Woodcraft drill bits (twist and brad)?

#4

JL

Re: Woodcraft drill bits (twist and brad)?

JL

>Okay - I'll get a twist set then. I mean all they'll really be doing is drilling pilot holes most of the time.