Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Round-over Bit Sizing

Posts

Round-over Bit Sizing

#1

Round-over Bit Sizing

Doug Reynolds in Seattle

>Plans call for specific round-over profiles on molding. How can I easily determine the size of round-over router bits? If I need a 1/4" round-over, can I take a 1/4" drill bit and see if it matches the router bit profile exactly or, do I use a 1/2" drill bit? And, so on. TIA.

Re: Round-over Bit Sizing

#2

Re: Round-over Bit Sizing

Lee Schierer - McKean, PA

>Typically when a plan calls for a roundover, they are referring to a radius and roundover router bits are typically sized by radius as well. Using a drill bit would help you visualize the curvature and could be used to select which bit to use. Another option would be to make a storage rack and label the holes for the shanks with the radius size.

Lee

Re: Round-over Bit Sizing

#3

Jesper, Denmark

Re: Round-over Bit Sizing

Jesper, Denmark

>Round-over bits are sized by radius, so you would use a � inch drill bit.

Re: Round-over Bit Sizing

#4

Re: Round-over Bit Sizing

Fred Davis

>