Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Tabletop of Black Walnut & Zebrawood

Posts

Tabletop of Black Walnut & Zebrawood

#1

Tabletop of Black Walnut & Zebrawood

Dan Mitchell

>I'm planning to make a top for a coffee table, starting with a rectangle ~20" x 50". This will be made of a glue up of 3 boards, two 7.5" x 50" pieces of black walnut, with one 5" x 50" piece of zebrawood between them. I have never worked with either of these species by themselves, let alone in combination this way, and due to their cost, I want to make sure I'm not overlooking some reason this might be a bad combination, especially regarding finishing. Thoughts?

TIA

Dan

Re: Tabletop of Black Walnut & Zebrawood

#2

JL

I like the color choice...

JL

>If you can find a piece of holly or really light maple sapwood to bracket the Zebrawood, it might look even more interesting.

I actually did some table legs for a black walnut tabletop out of Zebrawood. It worked quite well.

Re: Tabletop of Black Walnut & Zebrawood

#3

Re: I like the color choice...

Dan Mitchell

>Thanks JL, yeah I thought the combo was a good one as well. I had originally though of using Wenge rather than the walnut, but the walnut has a similar look (prettier, even) while being less than 1/2 the price.

The basic design is a takeoff of one done by Tage Frid. The legs will be walnut as well. Should look great with our modern living room, if I can pull it off ;-)

Re: Tabletop of Black Walnut & Zebrawood

#4

Here's the basic Frid design

Dan Mitchell

>he used rosewood veneer over hard maple for the top, rather than the 3 board glue up I'm planning, sans veneer. Great shape!


img

Re: Tabletop of Black Walnut & Zebrawood

#5

Re: Tabletop of Black Walnut & Zebrawood

Jim Dillon

>Dan,

I have worked with zebrawood and walnut, but never in combination. Don't see why they shouldn't work together.

The darker wood in my zebrawood should match very well with walnut. Let us know what you come up with.

Jim

Re: Tabletop of Black Walnut & Zebrawood

#6

Thanks, Jim!

Dan Mitchell

>

Re: Tabletop of Black Walnut & Zebrawood

#7

Re: Tabletop of Black Walnut & Zebrawood

pecker

>I have seen comments on some of the forums that zebrawood tends to chip and tearout when planing and jointing.

If you will have to flatten the glued up panel, you may have to resort to sanding, rather than using hand planes on it.

Re: Tabletop of Black Walnut & Zebrawood

#8

Re: Tabletop of Black Walnut & Zebrawood

Dan Mitchell

>Thanks, I'll keep that in mind.

Re: Tabletop of Black Walnut & Zebrawood

#9

Re: Did you look up movement?

Brian in Brighton

>If the movement is not within a small amount to each other I would avoid anything like a glued edge joint. It might crack in the future as the wood movement is different.

Brian in Brighton

Re: Tabletop of Black Walnut & Zebrawood

#10

Where would I find that?

Dan Mitchell

>

Re: Tabletop of Black Walnut & Zebrawood

#11

Look here *LINK*

Dan Donaldson

>This is direct, but there is a link to it on the Woodcentral links page.

(lots of other neat stuff also ;-))


woodworking calculators

Re: Tabletop of Black Walnut & Zebrawood

#12

If you mean the "Shrinkulator"

Dan Mitchell

>it unfortunately doesn't list Zebrawood. Am I missing something, or is there another way to determine the compatibility of 2 woods in this regard?

Thanks for the reply.