Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

OT - Computer driver Q

Posts

OT - Computer driver Q

#1

OT - Computer driver Q

DouginDenver

>I have a Canon scanner I used with Windows XP. I just got a new computer with Vista. I tried to load it, but the CD told me there were compatibility issues. So I went to the Canon site which supposedly has a driver upgrade for Vista. But when I try to download it, it says "This program is for 32-bit Intel-compatible platforms only." The computer is an HP with an Intel processor. What does that message mean?

Re: OT - Computer driver Q

#2

Re: OT - Computer driver Q

Chuck W

>yes that driver should work alright.

Re: OT - Computer driver Q

#3

Re: OT - Computer driver Q

Tom

>Do you know if the Vista install you have is a 32 or 64-bit? 64 is becoming more and more common.

Re: OT - Computer driver Q

#4

Click

Mark Goodall - ATL - tooljunkie

>"..."This program is for 32-bit Intel-compatible platforms only." The computer is an HP with an Intel processor. What does that message mean?...."

Click: START then Right-Click: Computer and choose Properties.

Look at the Top and it will say something Like Visat Home. Look further down and under the System heading it will show you your system type.

Happy Woodworking!

Re: OT - Computer driver Q

#5

It's 64 bit

DouginDenver

>It's 64 bit, so am I out of luck on this scanner?

Re: OT - Computer driver Q

#6

Re: It's 64 bit

Dan Donaldson

>May very well be out of luck. Seems like there are a lot of devices lacking 64 bit drivers. Linux has the same issues. It is very difficult to get many things to work in the 64 bit version due to lack of drivers. Especially for the older models. The vendors have no incentive to take the time and resource to write 64 bit drivers for old stuff.

Re: OT - Computer driver Q

#7

Re: OT - Computer driver Q

Tom

>What's the model number? You may find the driver somewhere other than the Canon site. I wouldn't give up....