Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Melamine for cabinet interiors?

Posts

Melamine for cabinet interiors?

#1

Melamine for cabinet interiors?

Terry Alexander

>Finally....carpet is in...blinds are installed...beginning to look like a home (rather than a house).

I am thinking of using melamine for the interior sides and bottoms to my cabinets.

Pros...cons?

If "doable"...is it ok to use my WWII blade on this product? Cut it laminate side up or down.

As always....TIA for your valued advice/opinions.

Terry Alexander in West Texas

Re: Melamine for cabinet interiors?

#2

Jesper, Denmark

Re: Melamine for cabinet interiors?

Jesper, Denmark

>Cut laminate side up.

Consider something else under the sink if the laminate is on particle board. It does not like water at all.

Re: Melamine for cabinet interiors?

#3

Re: Melamine for cabinet interiors?

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>I will use it for some of my more utilitarian type work. I don't think I can get a paint finish as good as what it has for the same price. I guess you know you can get it with melamine on both or just one side, and with a mdo on the other side when the outside paints.

I only use it for built-in work which will never be moved. I never use MDF or PB when it can be moved. It is just to easy to break if it gets dropped or bumped.

There is a special glue for it, if you are not doing a special joint.

Re: Melamine for cabinet interiors?

#4

Makes a great box, easy to clen, bright interior!

Frank Mutchler in Colorado Springs

>Hi Terry. I used 5/8" melamine for my kitchen remodel 3 years ago. I also used Danny Proul's book, "Build Your Own Kitchen Cabinets", and found it very informative and helpful. I don't know how to estimate the number of kitchen cabinet installs that are out there that have melamine boxes but it must be a very high number. You probably know that the melamine is available in multiple colors, not just white.

I assembled the boxes as he suggests by pre-drilling for 2" #8 screws that are available on his site. The boxes are only screwed together; no biscuits, dowels, glue, etc. and they are very rigid.

I don't know of any wood that will tolerate water very well so I didn't worry about using melamine for the sink base. If I have a disastrous leak and the melamine swells, I'll cut it out and replace. it, same as if it was plywood. I got the nice stainless slider from Lee Valley.

I just picked up 3 more sheets that I'll be using to make my wife's bathroom vanity out of. While the kitchen is all hickory, the vanity will be cherry.


img