We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I recently purchased the Dust Deputy from Oneida that attaches to a shop vac. I've been sanding on a project for the last three nights (sander is hooked to shop vac). After checking the filter on the vac, it looks like brand new and all of the sanding dust is in the bucket of the Dust Deputy. It is the next best thing to sliced bread.
>Yes, I just purchased one also. I have not done a great deal of sawing or sanding since, but the cyclone seems to work better than the trash can style I have been using.
>I just posted above some questions about dust collection and asked if anyone had tried one of the items like this (should have read down first!). With a good review, I may have to try one out.
Looks like the reviewer at FWW (#207)concurs with your assessment. He liked it, especially if one didn't have to move their shop vac often. Don't see why one couldn't make a small movable cart so that both can be moved at the same time, if necessary. I see from looking at the picture that the Dust Deputy and vac are fastened together somehow. Still, a cart would be nice. Looks very interesting.
>I have one and like it very much. You do have to buy a connector that Oneida sells for the junction between your shop vac's hose and the cyclone.
I don't see that anything makes it to the shop vac. I don't have a shop with dedicated space for dedicated tools so being able to move it around (just like I have to move my table saw everytime I use it)is fine with me.
I haven't figured how to hook everything up to it since there are several different port sizes on the miter saw, sander, table saw, etc.
Oneida discounts them from time to time. I got mine around Father's Day.
>I just looked at the newest Oneida Dust Deputy video (posted link in thread above) and noticed one great improvement...the inlet and outlet on the Dust Deputy are now tapered to fit 2 - 2 1/2" hose. This was a great annoyance to me with the original metal DD. Looks like Oneida built a better mouse trap with this simple idea.
As to mounting the DD on the side of a shop vac, the video shows that, too. It seems like this would be unwieldy at best, and annoying at worst...just too big and cumbersome. I'll stick with my idea of buying an extra link of good quality hose and leaving the DD and vac in one spot for most of my work. By placing the combo along a wall under my lathe I can reach 20' in any direction and it is still out of the way.
Some points not in my post above------WebKitFormBo
Joe Pack------WebKitFormBoundaryhPCvlW7w+cPlnYjb
>I just looked at the newest Oneida Dust Deputy video (posted link in thread above) and noticed one great improvement...the inlet and outlet on the Dust Deputy are now tapered to fit 2 - 2 1/2" hose. This was a great annoyance to me with the original metal DD. Looks like Oneida built a better mouse trap with this simple idea.
As to mounting the DD on the side of a shop vac, the video shows that, too. It seems like this would be unwieldy at best, and annoying at worst...just too big and cumbersome. I'll stick with my idea of buying an extra link of good quality hose and leaving the DD and vac in one spot for most of my work. By placing the combo along a wall under my lathe I can reach 20' in any direction and it is still out of the way.