Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

What Glue to Use for Bedframe?------WebKitFormBoun

Posts

What Glue to Use for Bedframe?------WebKitFormBoun

#1

What Glue to Use for Bedframe?------WebKitFormBoun

Mich B------WebKitFormBoundaryhPv+ULkWBX2gqvI9

>I shipped an antique bed frame and the shippers broke the footboard. It is an antique bedframe and the footboard is curved. There is now a hairline crack running from the top to the bottom of the footboard. I am afraid any lateral movement by persons shifting their weight on the bed (once put together) will rip the footboard in half. Therefore, I am wondering what type of glue to use which I can both get into a narrow crack with a syringe and will be strong enough to handle the weight of persons and mattress etc.

------WebKitFormBoundaryhPv+ULkWBX2gqvI9

Re: What Glue to Use for Bedframe?------WebKitFormBoun

#2

Re: What Glue to Use for Bedframe?------WebKitForm

Dan Donaldson

>Depending on its age, there is a reasonable chance that an antique was originally assembled with hide glue. That is what I would use. Another reason is that it is reversible if, for some reason the first repair didn't work out. you can clean it off and try again.

Re: What Glue to Use for Bedframe?------WebKitFormBoun

#3

Ellis Walentine

Can't picture it

Ellis Walentine

>I'm trying to visualize this footboard but I can't. You say it's curved, but in which dimension? Is it an Empire style that curves over or is it a solid board with a curved top? Or something else? In any case, you say the crack runs vertically. That too is puzzling, but I doubt it could affect the integrity of the bed. The weight of the people and the bedding is generally carried by the slats to the side rails.

I don't suppose you could post a little photo?

Ellis Walentine, Host

Re: What Glue to Use for Bedframe?------WebKitFormBoun

#4

Thought it read... best glue for bedtime ??

Frank in Forest Hill

>

Re: What Glue to Use for Bedframe?------WebKitFormBoun

#5

Re: What Glue to Use for Bedframe?------WebKitForm

Dick Coers

>I would use titebond 1. I would also use my shop vac to pull glue through a crack. Vac hose on one side, glue applied to the other side of the wood. If you can splay the crack just slightly, the glue will pull through even easier.

Re: What Glue to Use for Bedframe?------WebKitFormBoun

#6

Great Shop Tip, Dick

George@Colonel's Workshop-Havertown PA

>

Re: What Glue to Use for Bedframe?------WebKitFormBoun

#7

Now you tell me....

Barry Irby

>That is a great tip. I have tried blowing glue into joints with my air compressor. That has got to be about fifty times messier than sucking it through with the shop vac. I have tried blowing it in with my mouth. Just put your lips over the crack and blow on the puddle of glue. Maybe that's why I think guacamole tastes like Elmers.