shutters- not turned
john lucas
>I'm know mostly as a turner but I'm pretty handy with a router and table saw. I had to build these for a friend. They are copies of the antique one. I never know how much to charge for stuff like this but when it's a friend you can't turn it down so you just charge a rate that you don't feel too bad about.
I didn't have enough Poplar on hand to make the whole thing so I used some really old pine for the top two panels. The hardest part by far was the raised panels. My Powermatic contractors saw is having problems with the height adjustment lock so I really had to sneak up on the cut and still had some problems that were corrected with a hand plane. It also doesn't have the power to cut deep angled cuts so patience is a good thing even with a thin kerf blade.



